
Control panel messages (continued)
Control panel message
INCORRECT <COLOR> CARTRIDGE
alternates with
For help press ![]()
Incorrect supplies For status press ![]()
Initializing
Description
A color cartridge is installed in an incorrect slot or the cartridge is the wrong type, and the cover is closed.
At least one supply item is incorrectly positioned in the printer and another supply item is missing, incorrectly placed, out, or low.
This message is displayed when the printer is turned on, as soon as the individual tasks begin initialization.
Recommended action
Press
for help.
or
See Changing print cartridges for more information.
Press
and then press
for help.
or
See Replacing supplies and parts for more information.
No action necessary.
Initializing permanent storage
This message is displayed when the | No action necessary. |
printer is turned on to show that |
|
permanent storage is being made ready |
|
for use. |
|
INSTALL <COLOR> CARTRIDGE
alternates with
For help press ![]()
INSTALL FUSER For help press ![]()
INSTALL SUPPLIES For status press ![]()
INSTALL TRANSFER UNIT
alternates with
For help press ![]()
LOAD TRAY X <TYPE> <SIZE>
alternates with
For help press ![]()
The cartridge is either not installed or not correctly installed in the printer.
The fuser is either not installed or not correctly installed in the printer.
At least one supply item is missing or is not correctly seated in the printer and another supply item is missing, incorrectly placed, out, or low. Insert the supply item or make sure the installed supply item is fully seated.
The transfer unit is either not installed or not correctly installed in the printer.
Tray X is either empty or configured for a type and size other than specified in the job. No other tray is available.
Press
for help.
or
See Changing print cartridges for more information.
Press
for help.
or
See Replacing the fuser and pickup roller for more information.
Press
and then press
for help.
or
See Supply replacement guidelines for more information.
Press
for help.
or
See Replacing the transfer kit for more information.
Press
for help.
or
See Configuring trays for more information.
ENWW | Control panel messages 143 |