HP 13-h211nr x2 manual Removal and replacement procedures, Tablet component replacement procedures

Removal and replacement procedures

NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions.

Tablet component replacement procedures

CAUTION: Tablet components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the tablet and void the warranty.

This chapter provides removal and replacement procedures for authorized service provider only parts.

There are as many as 29 screws that must be removed, replaced, and/or loosened when servicing the tablet. Make special note of each screw size and location during removal and replacement.

Back cover

NOTE: The back cover spare part kit includes internal shielding.

Description	Spare part number
For use only on tablet models with WWAN capability	746492-001
For use only on tablet models without WWAN capability	736881-001
Display assembly:

NOTE: The display assembly does not include the display assembly cable. The display assembly cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 23 for more Cable Kit spare part information.

13.3-inch, AG, FHD, WLED TouchScreen, display assembly for use only on tablet models with	765844-001
model numbers f000 through f099
13.3-inch, AG, FHD, WLED TouchScreen, display assembly for use only on tablet models with	737696-001
model numbers g200 through g299 and g100 through g199
13.3-inch, AG, HD, WLED TouchScreen, display assembly for use only on tablet models with	737697-001
model numbers g200 through g299 and g100 through g199

Before disassembling the tablet, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

Remove the back cover:

1.Place the tablet on a flat surface, display screen side up, with the docking connector, power connector, and audio connector toward you.

38 Chapter 4 Removal and replacement preliminary requirements