c.Remove the hard drive bracket (3) from the hard drive.
The hard drive bracket, hard drive connector cable, and screws are available in the Hard Drive Hardware Kit, spare part number
Reverse this procedure to install the hard drive.
Hinge assembly
NOTE: The hinge assembly spare part kit includes two cables and two rubber feet.
Description | Spare part number |
|
|
For use only on tablet models with model numbers f000 through f099 | |
|
|
For use only on tablet models with model numbers g200 through g299 and g100 through g199 | |
|
|
Before removing the hinge assembly, follow these steps:
1.Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet and keyboard base by unplugging the power cord from the tablet and keyboard base.
3.Disconnect the tablet from the keyboard base.
4.Remove the bottom cover (see Bottom cover on page 68).
5.Remove the keyboard base battery (see Keyboard base battery on page 70).
6.Remove the audio /USB board (see Audio/USB board on page 73).
7.Remove the power connector board (see Power connector board on page 74).
78 | Chapter 4 Removal and replacement preliminary requirements |