HP 13-h211nr x2, 13t-h200 x2, 13-h210dx x2 manual Removal and replacement procedures

Before removing the system board, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 38), and then remove the following components:

a.Tablet battery (see Tablet battery on page 40)

b.Solid-state module (see Webcamera/microphone module on page 42)

c.WLAN module (see WLAN module on page 45)

d.WWAN module (see WWAN module on page 47)

Removal and replacement procedures 65