HP 13-h211nr x2, 13t-h200 x2, 13-h210dx x2 manual Proximity sensor module

4.Remove the tablet battery (5).

Reverse this procedure to install the tablet battery.

Proximity sensor module

Description	Spare part number
Proximity sensor module	736890-001
NOTE: The proximity sensor module does not include the proximity sensor module cable. The
proximity sensor module cable is included in the Cable Kit, spare part number 736883-001. See
Cable Kit on page 23 for more Cable Kit spare part information.

Before removing the proximity sensor module, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 38).

5.Remove the tablet battery (see Tablet battery on page 40).

Removal and replacement procedures 41