5.Remove the audio/power connector board (5).
6.Remove the audio/power connector board and cable. Reverse this procedure to install the audio/power connector board.
Vibrator module
Description | Spare part number |
|
|
Vibrator module (includes cable) | |
|
|
Before removing the vibrator module, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 38).
5.Remove the tablet battery (see Tablet battery on page 40).
Remove the vibrator module:
1.Disconnect the vibrator module cable (1) from the system board.
56 | Chapter 4 Removal and replacement preliminary requirements |