HP 13t-h200 x2, 13-h211nr x2, 13-h210dx x2 Keyboard base battery, Description Spare part number

Keyboard base battery

Description	Spare part number
3-cell, 33-Wh, 3.05-Ah, Li-ion battery for use only in the keyboard base (includes cable)	723997-006

Before removing the keyboard base battery, follow these steps:

1.Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet and keyboard base by unplugging the power cord from the tablet and keyboard base.

3.Disconnect the tablet from the keyboard base.

4.Remove the bottom cover (see Bottom cover on page 68).

WARNING! To reduce potential safety issues, use only the battery provided with the keyboard base, a replacement battery provided by HP, or a compatible battery purchased from HP.

CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To prevent loss of information, save your work or shut down the tablet through Windows before removing the battery.

Remove the keyboard base battery:

1.Disconnect the keyboard base battery cable (1) from the power connector board.

2.Release the hinge assembly cables from the clips (2) built into the keyboard base battery.

3.Remove the four Phillips PM2.0×3.0 screws (3) that secure the keyboard base battery to the keyboard/top cover.

70 Chapter 4 Removal and replacement preliminary requirements