d.WWAN module (see WWAN module on page 47)
e.Volume button board (see Volume button board on page 51) Remove the wireless antenna cables and transceivers:
1.Disconnect the WLAN antenna cables (1) from the WLAN module.
2.Release the wireless antenna cables from the retention clips (2) and routing channel built into the display assembly.
3.Detach the wireless antenna transceivers (3) from the display assembly. (The wireless antenna transceivers are attached to the display assembly with
Reverse this procedure to install the wireless antenna cables and transceivers.
Removal and replacement procedures | 63 |