3.Remove the card reader board (3) by sliding it forward, making sure to carefully route the card reader board cable through the opening (4) in the display assembly.
Reverse this procedure to install the card reader board.
Speakers
Description | Spare part number |
|
|
Speaker Kit (includes left and right speakers and cables) | |
|
|
Before removing the speakers, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 38), and then remove the following components:
a.Tablet battery (see Tablet battery on page 40)
b.Audio/power connector board (see Audio/power connector board on page 55)
Removal and replacement procedures | 61 |