HP 13-h211nr x2, 13t-h200 x2, 13-h210dx x2 manual Micro Solid-state drive mSSD

micro Solid-state drive (mSSD)

Description	Spare part number
128-GB mSSD for use on all tablet models	737218-001
64-GB mSSD for use only on tablet models with model numbers g200 through g299 and g100	737217-001
through g199

Before removing the solid-state drive, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 38).

5.Remove the tablet battery (see Tablet battery on page 40).

Remove the solid-state drive:

1.Remove the Phillips PM2.0×3.0 screw (1) that secures the solid-state drive to the system board. (The solid-state drive tilts up.)

2.Remove the solid-state drive (2) by pulling the drive away from the slot at an angle.

44 Chapter 4 Removal and replacement preliminary requirements