HP 13-h210dx x2, 13t-h200 x2, 13-h211nr x2 manual Volume button board

Volume button board

Description	Spare part number
Volume button board (includes cable)	736893-001
NOTE: The volume button board does not include the volume button board cable. The volume
button board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit
on page 23 for more Cable Kit spare part information.

Before removing the volume button board, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 38).

5.Remove the tablet battery (see Tablet battery on page 40).

Remove the volume button board:

1.Release the ZIF connector (1) to which the volume button board cable is attached, and then disconnect the volume button board cable from the system board.

2.Remove the two Phillips PM2.0×3.0 screws (2) that secure the volume button board to the display assembly.

Removal and replacement procedures 51