HP NuDAQ I-9111DG/HR manual 39 9111ADINTStart

Page 69

W_9111_AD_HR_Aquire (ByVal cardNo As Integer, ad_data As Integer) As Integer

@ Argument

cardNo: the card number of PCI-9111 card initialized.

ad_data: the 16bits A/D converted value. The data format can be referred to section 5.1.6 for details.

@Return Code ERR_NoError ERR_AD_AquireTimeOut

5.39_9111_AD_INT_Start

@ Description

This function is used to initialize and start up the AD EOC (end-of-conversion) interrupt transfer mode. This function could perform A/D conversion N times with interrupt data transfer by using pacer trigger. It takes place in the background which will not stop until the N-th conversion has been completed or your program execute _9111_AD_INT_Stop() function to stop the process.

After executing this function, it is necessary to check the status of the operation by using the function _9111_AD_INT_Status(). While all the specified count of data are acquired, the interrupt status will be changed to “AD_INT_STOP”.The function can perform on single A/D channel (autoscan is disable) or multiple A/D channels (autoscan is enable) with fixed analog input range.

Note: The interrupt mode provided in this function is internal timer source, therefore you must specify c1 & c2 as calling this function. In addition, this function in this library supports just one PCI-9111 card and provides only one ISR (interrupt service routine) for processing the interrupt events. If multi-9111 cards and multi -isr is necessary, users can modify this library for your own purpose.

@ Syntax

C/C++ (DOS)

U16 _9111_AD_INT_Start ( U16 cardNo, U16 auto_scan, U16 ad_ch_no, U16 ad_gain, U16 count, I16 far *ad_buffer, U16 c1, U16 c2)

C/C++ (Windows 95)

U16 W_9111_AD_INT_Start (U16 cardNo, U16 auto_scan, U16 ad_ch_no, U16 ad_gain, U16 count, I16 far *ad_buffer, U16 c1, U16 c2)

C/C++ Library ∙59

Image 69

Contents NuDAQ Trademarks Questions Getting service from AdlinkPage Features Applications Specifications Software Supporting B l e o f C o n t e n t sPCI PnP Registers Address Map Hardware Interrupt Clear Register Libraries Installation Programming GuideConversion Interrupt ControlTable of Contents ∙ 9111util What do you need VR Assignment AdjustmentHow to Use This Guide Page Introduction FeaturesApplications SpecificationsUnipolar 0~10V Bipolar -10V~+10V Programming Library Software SupportingPCIS-VEE HP-VEE Driver PCIS-LVIEW LabVIEW DriverDAQBenchTM ActiveX Controls DASYLabTM PROPCIS-OPC OPC Server PCIS-ICL InControlTM Driver∙ Software Installation Guide InstallationWhat You Have UnpackingPCB Layout of the PCI-9111 PCI-9111s LayoutJumper Descriptions Hardware Installation OutlineDevice Installation for Windows Systems Connectors Pin Assignment∙ CN 1 Digital Signal Input DI 0 ~ ∙ CN 3 Analog Input/Output, Extended I/O, Trigger Signals ∙ CN 2 Digital Signal Output do 0 ~Connect with ACLD-8125 Daughter Board ConnectionConnect with ACLD-9137 Connect with ACLD-9182PCI PnP Registers Registers FormatA/D Data Registers I/O Address MapAddress Write Read I/O AddressAddress Base + 0h Attribute read only Data Format A/D Channel Control RegisterBit Address Base + 6h Attribute write only Data Format BitA/D Channel Read Back Register A/D Input Signal Range Control RegisterAddress Base + 6h Attribute read only Data Format Bit Address Base + 8h Attribute write only Data Format BitA/D Range and Status Read back Register A/D Trigger Mode Control RegisterAddress Base + 8h Attribute read only Data Format Bit Address Base + 0Ah Attribute write only Data Format BitMode Description Address Base + 0Eh Attribute write only Data Format BitAddress Base + 0Ch Attribute write only Data Format Bit Hardware Interrupt Clear Register 12 A/D Mode & Interrupt Control Read Back RegisterAddress Base + 48h Attribute write only Data Format Bit Address Base + 0Ah Attribute read only Data Format BitAddress Base + 4h Attribute write only Data Format Bit Address Base + 4h Attribute read only Data Format BitAddress Base + 2h Attribute read only Data Format 15 D/A Output Register Address Base + 2h Attribute write only Data Format BitAddress Base + 40h ~ Base + 46h A/D Conversion Operation Theorem2 A/D Signal Source Control 1 A/D Conversion ProcedureAnalog Input Signal Connection 3 A/D Trigger Source Control Signal RangeExternal Trigger EITS=1, TPST=don‘t care 4 A/D Data Transfer ModesFifo Half-Full Polling EOC Interrupt Transfer Pre-Trigger ControlTime FFF 6 A/D Data FormatIRQ Level Setting Interrupt Control System ArchitectureDual Interrupt System Extended Digital I/O Port Interrupt Source Control44mV 88mV D/A ConversionDigital Input and Output Timer/Counter Operation IntroductionPacer Trigger Source Pre-Trigger Counter4 I/O Address ++ Library Libraries InstallationData Types Programming Guide Naming Convention9111DO 9111Initial++ DOS ++ Windows9111DI 9111DOChannel9111EDI 9111DIChannel10 9111EDOReadBack 9111EDO11 9111SetEDOFunction 13 9111ADReadData 12 9111DA15 9111ADSetChannel 14 9111ADReadDataRepeat16 9111ADGetChannel Input Range Gain Gain Code 17 9111ADSetRange19 9111ADGetStatus 18 9111ADGetRange20 9111ADSetMode 22 9111INTSetReg 21 9111ADGetMode23 9111INTGetReg 24 9111ResetFIFO26 9111Set8254 25 9111ADSoftTrigger27 9111Get8254 28 9111ADTimer30 9111CounterRead 29 9111CounterStart31 9111CounterStop 32 9111INTSourceControl 34 9111GetIRQChannel 33 9111CLRIRQ36 9111ADFFHFPolling 35 9111GetIRQStatus38 9111ADHRAquire 37 9111ADAquire39 9111ADINTStart 40 9111ADFFHFINTStart ++ Library ∙61 42 9111ADFFHFINTStatus 41 9111ADINTStatus43 9111ADFFHFINTRestart 44 9111ADINTStop What do you need CalibrationA/D Adjustment VR AssignmentFunctions of VRs Bipolar Analog Output D/A Adjustment Unipolar Analog OutputSoftware Utility 9111utilRunning 9111util.exe System Configuration Calibration Function Testing Menu Window Functional TestingIeeprom Product Warranty/Service