Note
Note
•For parallel connection: Click Parallel Cable and use the
8Follow the instructions on the screen to complete the installation.
9When prompted, connect the USB or parallel cable to the computer and the printer.
The Found New Hardware wizard appears on the computer screen and the printer icon is created in the Printers folder.
10To share the printer, see “Sharing the printer on a locally shared network (Windows)”.
Completing a hardware-first installation
Complete the setup using these instructions if you already installed a USB or parallel cable (not included) and then started the software. The Found New Hardware screen appears.
To complete a hardware-first installation
Before you can install the printer software on a computer running Windows XP
1Click Next in the Found New Hardware wizard.
2Click Search for the best driver for your device (Recommended), and then click Next.
3Insert the Starter CD into the
4If the CD menu appears, click Exit twice to close the CD menu.
5Select Specify a location.
6Click Browse to locate the root directory on the Starter CD, and then click OK.
7Click Next, and then follow the instructions on the screen.
8Click Next, and then click Finish.
9To share the printer, see “Sharing the printer on a locally shared network (Windows)”.
Upon completion of the
ENWW |