Using HP Web Jetadmin
HP Web Jetadmin is a
HP Web Jetadmin supports
zWindows NT 4.0, 2000, or XP
zRed Hat Linux
zSuSE Linux
To download HP Web Jetadmin software and for the latest information, go to
http://www.hp.com/go/webjetadmin.
Using the deskjet control panel (DJCP)
Some software manufacturers do not develop printer drivers for their
zAdjust print settings. (Printing using special features is not supported.)
zSpecify the default printer from your DOS program.
zSet the symbol set for the language you are using in a document.
Note that changes made to settings in your DOS program may override changes made to the same settings in the DJCP.
To install DJCP
1Make sure the printer is set up and that the printer is turned on.
2Insert the Starter CD into the CD drive.
3At the DOS prompt, type the letter of the CD drive and press ENTER. For example, type D: and press ENTER.
4Change to the directory to drivers\dos\<language>\, where <language> is the language you prefer, and press ENTER.
5Type install and press ENTER.
6Follow the instructions on the screen to complete the installation.
ENWW |