SECTION 14: REPLACEMENT PARTS
14.3 Ignition Electrode and Flame Probe
|
| Inshot |
|
| Burners |
Manual Reset |
|
|
Limit Switch |
|
|
(Position may vary.) |
|
|
|
| Flame |
| Flame | Probe |
|
| |
| Probe |
|
Limit |
|
|
Switch |
|
|
|
| Burner Compartment |
Ignition |
| Front Views |
Electrode |
|
|
|
| Ignition |
|
| Electrode |
.120 (3 mm) spark
gap
Inshot
Burners
To replace the electrode or flame probe, remove the electrical lead and screw.
Pull out from mounting. Refit in reverse ensuring that the gap to burner is as shown in the front view of the burner compartment.
Description | Part Number | Qty |
Spark Electrode | 90427411 | 1 |
Automatic Ignition Flame Probe | 90439300 | 1 |
Transformer | 90436900K | 1 |
Ignition Module | 90434008 | 1 |
Inshot Burners UHD[X][S][R] 75 | 92000002 | 5 |
Inshot Burners UHD[X][S][R] 100 | 92000002 | 6 |
Inshot Burners UHD[X][S][R] 125 | 92000002 | 7 |
Limit Switch | 90412104 | 1 |
Manual Reset Limit Switch (75 only) | 90412106 | 1 |
14.4 Heat Exchanger
The heat exchanger consists of a
37