HP vs80 manual Choosing a Location, On top of the autoloader

Choosing a Location

Choose a location that meets the following criteria (see Technical

Specifications on page 71 for more information on specifications):

Table 1 Location Criteria

Standalone	Select a location that is flat, sturdy, level, and close to a
requirements	host server. Do not place the autoloader on the floor or
	other carpeted surfaces.
	CAUTION: Do not place the autoloader on its side or
	upside down or stack items that weigh more than 15 KG
	on top of the autoloader.
Rack	Standard 19-inch rack with 2U of clearance.
requirements
Room	10-35º C (50-95º F)
temperature
Humidity	20-80% RH (non condensing)
Power source	■ AC power voltage: 100-127 VAC; 200-240 VAC
	■ Line frequency: 50-60 Hz
	NOTE: Locate the AC outlet near the autoloader. The AC
	power cord is the product’s main AC disconnect device
	and must be easily accessible at all times.
Weight	10 kg (22 lbs)
Air quality	Minimal sources of particulate contamination. Avoid
	areas near frequently used doors and walkways, stacks
	of supplies that collect dust, printers, and smoke-filled
	rooms.
	CAUTION: Excessive dust and debris can damage tapes
	and tape drives.
Clearance	Back	Minimum of 15 cm (6 inches)
	Front	Minimum of 31 cm (12 inches)
	Sides	Minimum of 5 cm (2 inches)

12 Installing the Autoloader Chapter 1