HP vs80 manual Firmware Revision

Note	Errors will show as “X X YY”. “YY” represents the specific error
	code, and “X X” represents non pertinent address codes.
	Additionally, errors range from 0 to -63, where 0 is the newest
	error and -63 is the oldest.

Firmware Revision

This option displays the revision of the firmware currently installed in the autoloader.

Note	The tape drive and autoloader firmware is a single image, but
	displays as three firmware numbers on the front panel. (An
	example is 5000 8000 0102.)

To use this option, follow these steps:

1.From the Home Screen or main menu, press the [+] or [-] button until Information appears on the top line of the LCD screen.

2.Press the [Enter] button to access the available options.

3.Press the [+] or [-] button until Firmware Rev appears on the LCD screen.

The LCD screen displays the revision of the firmware currently installed in the autoloader.

4.Press [Cancel] when done.

Note	After a firmware update, the firmware revision displayed on the
	LCD will not be updated until the autoloader is power cycled.

50 Autoloader Administration Chapter 3