Installation Overview
Installing the autoloader consists of the following steps, which are explained in more detail later in this chapter:
1.Choose a location for the autoloader (page 12).
2.Unpack and check the autoloader for shipping damage (page 13).
3.Identify the accessories that come with the autoloader (page 14).
4.Install the autoloader in a computer rack or select a table or desktop near the host server (page 16).
5.Shut down, turn off, and remove power from the server and all devices attached to the server (page 19).
6.Attach the SCSI cable to the autoloader and server’s SCSI host adapter (page 19).
7.Attach the power cable to the autoloader and plug in the power cable to the nearest power outlet (page 19). Power the autoloader on to ensure it passes the
8.Set the SCSI ID for the autoloader (if necessary, page 41).
9.Set up the host and verify the connection (page 21).
8 | Installing the Autoloader | Chapter 1 |