HP vs80 manual Configuration menu. See page 38 or power

Table 5 Error Codes

Error Code	Description	Details
3 0 83	Inventory not valid.	The cartridge inventory is not valid because of
		manual changes or previous fatal errors. Update
		the inventory using the Re-inventory option in the
		Configuration menu. See page 38 or power
		cycle.
3 0 84	Source empty.	There is no cartridge in the location where a
		cartridge move was issued.
3 0 85	Destination full.	The location where a cartridge move was issued
		already contains a cartridge.
3 0 86	Mail slot access rejected.	User attempted to access the mail slot, but media
		removal was prevented by the host.
3 0 87	Operation timeout.	A command did not complete in the required
		amount of time.
3 0 88	Communications error during	Cycle power on the autoloader and attempt the
	loop-back.	operation again. If the error recurs, contact your
		technical support representative.
3 0 89	System test timeout.	There was a communication timeout between the
		drive and loader during the System Test.
3 0 8F	Recovered loader error.	Loader error recovery successful. Your diagnostic
		tool can provide details of the original loader
		error.
3 0 90	Mechanical Initialization failure.	The robotics were not able to move to the safe
		mechanical initialization position. Manual
		intervention is necessary.
3 0 91	Inventory scan failure.	Fatal robotic error occurred during the inventory
		scan.
3 0 92	Preposition failed.	Belt positioning error occurred during
		'Preposition' command.
3 0 93	Cartridge load error.	A failure occurred while trying to load a
		cartridge from the drive to its slot.

Chapter 4 Diagnostics and Troubleshooting 67