Cause: The original HP ink in the indicated print cartridges was depleted.
Low on ink
Solution: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a
If you have installed a refilled or remanufactured cartridge, or a cartridge that has been used in another product, the ink level indicator may be inaccurate or unavailable.
For HP product return and recycling information, visit us at: www.hp.com/recycle.
Cause: The indicated print cartridges were estimated to be low on ink and might need to be replaced soon.
Printing in ink-backup mode
Solution: If you receive the
1
2Plastic tape with pink pull tab (must be removed before installing)
3Ink nozzles under tape
Solve a problem
Cause: When the product detected that only one print cartridge is installed, ink- backup mode is initiated. This printing mode lets you print with a single print cartridge, but it slows the product and affects the quality of printouts.
Print cartridge is missing, incorrectly installed, or not intended for your product
Solution: If the print cartridges are missing, incorrectly installed, or not intended for your product, one or both of the print cartridge status lights begin to blink. One of the following messages may appear on your computer screen: