60
Control panel messages (continued)
Message | Description | Action |
|
|
|
Invalid credentials. Check | The name and password that | Contact the administrator. |
account name and password. have been configured for |
| |
| authenticating LDAP |
|
| searches are invalid. |
|
|
|
|
Invalid PIN. Job canceled. | You incorrectly entered the | Resend the document, entering the correct |
| PIN (personal identification | PIN number. |
| number) for the HP JetSend- |
|
| enabled printer to which you |
|
| were sending. |
|
JetDirect not responding. Please check the card or the firmware version.
The firmware version of the Contact the administrator. HP JetDirect print server
(interface card) installed in the digital sender is not compatible with the product.
JetSend subsystem busy. | The digital sender has | The pending HP JetSend job must complete |
| another HP JetSend job | before you can submit another one. Wait and |
| pending. | retry. |
|
|
|
LDAP protocol error. | The LDAP search could not | ● Turn the digital sender off and then back |
Search error. | complete because of a | on. |
| problem with a network | ● If the problem persists, contact the |
| connection or LDAP server. | administrator. |
|
|
|
Low resources. | There is not enough space | Try again later. |
| on the hard drive to process |
|
| the job (for example, |
|
| because too many other jobs |
|
| are pending). |
|
Missing page in second pass. Job canceled.
You selected the duplex mode, but there are fewer pages in the second pass than in the first.
Press any key to clear the message. Check your pages and retry the job.
Network error codes. | There is a problem with the |
| HP JetDirect print server. |
●Turn the digital sender off and then back on.
●Note the codes and contact the administrator.
No destination available. | No destination has been | Contact the administrator. |
| configured for the |
|
| customized function key that |
|
| you selected. |
|
No matches found. | There is no entry in the LDAP |
| directory that matches your |
| search string and search |
| criteria. |
Check the accuracy of your search string and search criteria.
No pages scanned. Job | After a |
canceled. | did not reinsert a document |
| in the ADF. |
Press any key to clear the message. Place the document in the ADF and try again.