Pentair 4/160, 4/100 important safety instructions IntelliFlo 4 Motor Assembly, Features

2

Features

•Adjusts to various pool sizes

•Prevents thermal overload

•Detects and prevents damage from under and over voltage conditions

•Protects against freezing

•Communicates with a Pentair IntelliTouch, EasyTouch and IntelliComm system via a two-wire connection

•Easy to use operator control panel

•Operator control panel buttons for speed control

•Built-in strainer pot and volute

•Ultra energy-efficient TEFC Square Flange Motor

•Compatibility with most cleaning systems, filters, and jet action spas

•Driver assembly features permanent magnet synchronous motor

•Heavy-duty, durable construction designed for long life

•UL approval

IntelliFlo 4 Motor Assembly

The IntelliFlo three-phase six-pole motor operates at 3400 RPM (at 92% efficiency) and 1000 RPM (at 90%). The motor assembly is continually cooled by an external fan. Dual seals on the motor shaft and at the fan assembly seal the entire motor from any moisture from entering the motor assembly. For added protection, a slinger located in front of the main shaft seal assists in slinging water away from the shaft opening in the flange.

Motor fan cover

Motor assembly

Drive assembly and electronics enclosure

Control panel cover

Communication port for connection to IntelliTouch, EasyTouch or IntelliComm system via two-wire RS-485 cable

IntelliFlo 4 Motor Assembly

IntelliFlo 4 Installation and User’s Guide