3. Y your phone will find the Jabra BT4010..
Your phone then asks if you want to pair with it.. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4 zeros).. Your phone will confirm when pairing is complete..
In case of unsuccessful pairing, repeat steps 1 to 3..
Manual pairing
You can manually put your Jabra BT4010 into pairing mode, if you want to pair with a second phone or Bluetooth device:
1.M make sure the headset is off..
2.P press and hold the answer / end button for approx 5 sec.. until the Bluetooth indicator on the LCD display starts flashing..
3.S set your Bluetooth phone to discover your headset as described above..
Wearing style
The Jabra BT4010 ready to be worn without an earhook – simply insert it into your right or left ear with the headset pointing towards your mouth.. If you prefer to use the earhook, click it on as shown in the illustration..
For optimal performance, wear the Jabra BT4010 and your mobile phone on the same side of your body or within line of sight ..
In general, you will get better performance when there are no obstructions between your headset and your mobile phone..
english
Jabra bt4010 | 6 |