TEMPERATURE CONTROLS - OPERATING
Using 1 Universal Temperature Controller.
Press the On/Off button on the temperature controller.
The ON indicator will glow on the Temperature Controller. This indicates that the heater is ready to supply hot water when a tap is opened.
Adjusting Temperature
Simply press the Hot Water Temperature Up or Down arrow button until the desired temperature is displayed on the digital display.
To operate the heater, simply turn any hot water tap on. This will automatically light the burner providing hot water. The red In Use indicator will glow on the temperature controller.
Caution: Always check water temperature before use.
Note: With the hot water tap open and a temperature of 430C or higher selected, if the temperature is decreased below 430C, and then raised again the maximum available temperature will be 430C. For safety reasons temperature ‘priority’ cannot be transferred between controllers when a hot water tap is open.
20