Schneider Electric iEM3200, iEM3300, iEM3100 user manual Section Parameter Options Description

iEM3100 / iEM3200 / iEM3300 series user manual			Front panel display and meter setup
Section	Parameter	Options	Description
	Primary Addr.	0 - 255	Set the address for this device. The address must be unique for each device in a
			communications loop.
		2400
Communication (iEM3235)		4800
		9600	Select the speed for data transmission. The baud rate must be the same for all devices
	Baud Rate
		300	in a communications loop.
		600
		1200
	MAC Addr.	1 - 127	Set the address for this device. The address must be unique for each device in a
			communications loop.
		9600
		19200	Select the speed for data transmission. The baud rate must be the same for all devices
Communication (iEM3265)	Baud Rate	38400
			in a communications loop.
		57600
		76800
	Device ID	0 - 4194303	Set the Device ID for this device. Make sure the Device ID is unique in your BACnet
			network.
Com.Protection	Com.Protection	Enable	Protects selected settings and resets from configuration via communications.
		Disable
Contrast	Contrast	1-9	Increase or decrease the value to increase or decrease the display contrast.
Password	Password	0-9999	Sets the password for accessing the meter configuration screens and resets.
Reset Config	Reset Config	—	Settings are reset to their defaults, except for Password. Meter restarts.

DOCA0005EN-04 49