Schneider Electric iEM3300, iEM3200 Mechanical characteristics, Environmental characteristics

iEM3100 / iEM3200 / iEM3300 series user manual					Specifications
	Characteristic			Value	Meters
				2	iEM3115 / iEM3215
		Number			iEM3135 / iEM3155 / iEM3165 /
				1	iEM3175 / iEM3235 / iEM3255 /
					iEM3265 / iEM3275 / iEM3335 /
					iEM3355 / iEM3365 / iEM3375
		Type		Type 1 (IEC 61131-2)
		Maximum input	Voltage	40 V DC
	Programmable digital		Current	4 mA
	input	Voltage OFF		0 - 5 V DC	iEM3115 / iEM3135 / iEM3155 /
		Voltage ON		11 - 40 V DC	iEM3165 / iEM3175 / iEM3215 /
					iEM3235 / iEM3255 / iEM3265 /
		Nominal voltage		24 V DC
					iEM3275 / iEM3335 / iEM3355 /
		Isolation		3.75 kV rms	iEM3365 / iEM3375
		Wire		1.5 mm2 / 16 AWG
		Wire strip length		6 mm / 0.23 in
		Torque		0.5 Nm / 4.4 in•lb

Mechanical characteristics

Characteristic	Value		Meters
IP degree of protection	Front panel	IP40	iEM31•• / iEM32•• / iEM33••
	Meter body	IP20
Impact rating	IK08		iEM31•• / iEM32•• / iEM33••
Active energy display range	In kWh or MWh up to 99999999 MWh		iEM32••
	In kWh: 8 + 1 digits up to 99999999.9		iEM31•• / iEM33••
	500 flashes / kWh		iEM31••
Energy pulsing LED (yellow)1
	5000 flashes / kWh without consideration of transformer ratios		iEM32••
	200 flashes / kWh		iEM33••
1The pulses / kWh of the energy	pulsing LED cannot be changed.

Environmental characteristics

Characteristic		Value	Meters
Operating temperature	-25	°C (-13 °F) to +55 °C (131 °F) (K55)
Storage temperature	-40	°C (-40 °F) to +85 °C (185 °F)
Pollution degree	2
Relative humidity	5%	– 95% RH non-condensing	iEM31•• / iEM32•• / iEM33••
	Maximum dewpoint 50 °C (122 °F)
Location	For indoor use only
	Not suitable for wet locations
Altitude	< 2000 m (6561 ft) above sea level

Measurement accuracy

Characteristic		Value	Meters
		Class 1 conforming to IEC 62053-21 and IEC 61557-12 (PMD DD):	iEM31••
		Imax=63 A, Ib=10 A, and Ist=0.04 A
	Active energy
63 A		Class B conforming to EN 50470-3: Imax=63 A, lref=10 A, Imin=0.5 A, and	iEM31••
		Ist=0.04 A
	Reactive energy	Class 2 conforming to IEC 62053-23 and IEC 61557-12 (PMD DD):	iEM3135 / iEM3155 / iEM3165 / iEM3175
		Imax=63 A, Ib=10 A, and Ist=0.05 A
		Class 1 conforming to IEC 62053-21 and IEC 61557-12 (PMD DD):	iEM33••
		Imax=125 A, Ib=20 A, and Ist=0.08 A
	Active energy
125 A		Class B conforming to EN 50470-3: Imax=125 A, lref=20 A, Imin=1 A, and	iEM33••
		Ist=0.08 A
	Reactive energy	Class 2 conforming to IEC 62053-23 and IEC 61557-12 (PMD DD):	iEM3335 / iEM3355 / iEM3365 / iEM3375
		Imax=125 A, Ib=20 A, and Ist=0.1 A

DOCA0005EN-04 99