2
Step 2 Installing Sprocket Kit
Position the 1½” spacer (Part No. SP101) onto the shaft against the bearing as shown.
Next slide the sprocket (Part No. BSP01) against the spacer.
Insert key (Part No. K101) of sprocket kit into the keyway of sprocket and tighten the set screws.
Set Screws
Installing Tensioner Kit |
|
Before installing the air cylinder, the | Tension |
tensioner kit must be installed.(Part No. | Rod |
| |
OT101). |
|
Washers (4) | Cotter |
Pins |
Tensioner Roller