Samsung AS30UGBNUMG, AQ36UGBNUMG manual MainAA taining the air conditioner, Periodical checks

Page 21

MainAA taining the air conditioner

If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition.

1.Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and disconnect the power plug. There may be internal damage if moisture is left in components.

2.Before using the air conditioner again, dry the inner components of the air conditioner again by running in Fan mode for 3 to 4 hours. This helps remove odors which may have generated from dampness.

ENGLISH

Periodical checks

Refer to the following chart to maintain the air conditioner properly.

	Type	Description	Every 2	Every 3	Every 4	Once a year
	Type	Description	weeks	months	months	Once a year
			weeks	months	months

		Clean the air filter (1)	

		Clean the bio filter (1)		

	Indoor	Replace the deodorizing filter (1)				

		Clean the condensate drain pan (2)				
	unit	Clean the condensate drain pan (2)				
		Thoroughly clean the heat exchanger (2)				

		Clean the condensate drain pipe (2)			

		Replace the remote controller batteries (1)				

		Clean the heat exchanger on the outside of the unit (2)			

		Clean the heat exchanger on the inside of the unit (2)				

		Clean the electric components with jets of air (2)				
	Outdoor
	Outdoor	Verify that all the electric components are firmly				
	unit	tightened (2)				
	unit	tightened (2)

		Clean the fan (2)				

		Verify that all the fan assembly is firmly tightened (2)				

		Clean the condensate drain pan (2)				

: This check mark requires checking the indoor/outdoor unit periodically, following to the description to maintain the air conditioner properly.

(1) The described operations should be performed more frequently if the area of installation is very dusty.

(2) These operations must always be performed by qualified personnel. For more detailed information, see the installation part in the manual.

21

MAX4 AQ&AST&U_IB&IM_DB98-34063A_E.indd 21

2013-3-18 15:46:37

Image 21

Contents English Contents Important safety symbols and precautions SafetAA y precautionsFollow directions Wall socketFor Using For Cleaning Operation ranges ChecAA king before useChecAA king the name of the parts PowerMain parts  AQ/AS 30/32/36T  Display  AQ/AS 30/32/36TRemote controller buttons ChecAA king the remote controllerBattery changing time Remote controller displayStoring the remote controller Inserting the batteriesBasicAA function Press the button to set the desired fan speed Press the button to adjust the temperaturePress the Air swing button on the remote controller Using the Turbo functionAdjusA ting the air flow direction Vertical air flowPress the button on the remote controller AA modePress the Time Up or Time Down button to set the time Press the Set button to active it onSettinAA g the On/Off timer Press the On Timer/Off Timer buttonAdditional options available in On timer mode From the moment you have set the timer Using the Smart Saver functionIf the air conditioner is on If the air conditioner is off Turn off automaticallyUsing the Quiet function UsingAA the Auto Clean functionWhen the air conditioner is turned on 30/32/36T 30/32/36UCleaning the outdoor unit heat exchanger Cleaning the indoor unitOpening the panel Heat exchangerCleaning the air filter CleanAA ing the air conditionerRemoving the Air filter Open the panel and put the Air filter outAACleaning the air conditioner Bio filterBio filter sky-blue Deodorizing filter black Deodorizing filterPeriodical checks MainAA taining the air conditionerTroubleshootingAA Connection Flow movement changes. It is normalGeneral information Safety precautionsInstalling the unit Choosing the installation locationPower supply line, fuse or circuit breaker  a place where the air filter can be replaced easilyChooAA sing the installation location Where sulfide gas existsOutdoor Unit When the air outlet is towards the wall When installing more than 1 outdoor unit Figure Description Top view Side viewAccessories Accessories in the indoor unit caseAccessories in the outdoor unit case Optional accessories Fixing the installation plateTools required for installation General Tools Tools for test operationsConnecting the assembly cable Cable specificationConnecting the cable Extend the assembly cable if necessary Each wire is labeled with the corresponding terminal numberInstallation Cut off the remaining foam insulation Smooth the cut edgesCutting or extending the pipe AAPurging the indoor unitUnscrew the caps at the end of each pipe Put a flare nut slightly into the pipe and modify the flareOuter Diameter CuttingAA or extending the pipeTwo hoses are firmly connected, there is no water leakage Drain hose installationHose tight Check for leakage on both side of the drain outletAQseries Purging the connected pipesAdd refrigerant charge according to table below Adding RefrigerantIf you use a pipe shorter than 4 30/32 or 5 36 m Purge time is normalFixing the indoor unit in place PerfoAA rming the gas leak testsFixing the outdoor unit in place Outdoor unit installed on the wall by rackAppropriate support wall or ground ModelPress the Power button to stop the operation Press the Power button and check the followingFinalAA Check and Trial Operation Check the followingsApply heat to the contraction tube to contract it After tube contraction work is completed, wrap it withInsulation tape to finish AS36UGBUMG AS30UGBUMG AATechnical SpecificationsEnglish Egypt Questions or COMMENTS?Air Conditioner