Samsung AQ36UGBXUMG Accessories in the indoor unit case, Accessories in the outdoor unit case

Page 28

AAChoo

sing the installation location

(Unit : mm)

When the walls are blocking front and the rear side of the outdoor

When the upper part of the outdoor unit and

units

the air outlet is opposite the wall

		300 or more
600 or more	600 or more	1500 or more

When front and rear side of the outdoor unit is towards the wall

1500 or	600 or	3000 or	3000 or	200 or
more	more	more	more	more

500 ormore	300 or more

500 or more	300 or more

• If installation is done in inappropriate space, unit may generate sound and cause bad effect on the product.

• Installation must be done in level and in a place where vibration will not cause any effect.

Accessories

The following accessories are supplied with the air conditioner:

• The number of each accessory is indicated in parentheses.

Accessories in the indoor unit case
Installation Plate (1)	Remote	Batteries for
	Control (1)	Remote Control (2)

User's & Installation		Remocon Control
Manual (1)		Holder(1)

Ø4 x 16

Tapped Screws (2)

Accessories in the outdoor unit case

	5-wire			3-wire
Assembly Cable (1)			Power Cable (1)

2-wire

Assembly Cable (1)

Tapón de drenado (1) AQ

Pata de hule (4)

• The flare nuts are attached to the end of each pipe of an evaporator or a service port.

Use the nuts when connecting the pipes.

•The2(5)-wire assembly cable is optional. If it is not supplied, use the standard cable.

•The drain plug and rubber leg are only included when the air conditioner is supplied without the assembly pipe as seen in the picture below.

28

MAX4 AQ&AST&U_IB&IM_DB98-34063A_E.indd 28

2013-3-18 15:46:38

Image 28

Contents English Contents SafetAA y precautions Important safety symbols and precautionsFollow directions Wall socketFor Using For Cleaning ChecAA king before use Operation rangesPower ChecAA king the name of the partsMain parts  AQ/AS 30/32/36T  Display  AQ/AS 30/32/36TChecAA king the remote controller Remote controller buttonsRemote controller display Battery changing timeStoring the remote controller Inserting the batteriesBasicAA function Press the button to adjust the temperature Press the button to set the desired fan speedUsing the Turbo function Press the Air swing button on the remote controllerAdjusA ting the air flow direction Vertical air flowAA mode Press the button on the remote controllerPress the Time Up or Time Down button to set the time Press the Set button to active it onPress the On Timer/Off Timer button SettinAA g the On/Off timerAdditional options available in On timer mode Using the Smart Saver function From the moment you have set the timerIf the air conditioner is on If the air conditioner is off Turn off automaticallyUsingAA the Auto Clean function Using the Quiet functionWhen the air conditioner is turned on 30/32/36T 30/32/36UCleaning the indoor unit Cleaning the outdoor unit heat exchangerOpening the panel Heat exchangerCleanAA ing the air conditioner Cleaning the air filterRemoving the Air filter Open the panel and put the Air filter outBio filter AACleaning the air conditionerBio filter sky-blue Deodorizing filter Deodorizing filter blackMainAA taining the air conditioner Periodical checksTroubleshootingAA Flow movement changes. It is normal ConnectionSafety precautions General information Choosing the installation location Installing the unit Power supply line, fuse or circuit breaker  a place where the air filter can be replaced easilyWhere sulfide gas exists ChooAA sing the installation locationOutdoor Unit When installing more than 1 outdoor unit When the air outlet is towards the wall Figure Description Top view Side viewAccessories in the indoor unit case AccessoriesAccessories in the outdoor unit case Fixing the installation plate Optional accessoriesTools required for installation General Tools Tools for test operationsCable specification Connecting the assembly cableConnecting the cable Each wire is labeled with the corresponding terminal number Extend the assembly cable if necessaryInstallation Smooth the cut edges Cut off the remaining foam insulationAAPurging the indoor unit Cutting or extending the pipeUnscrew the caps at the end of each pipe Put a flare nut slightly into the pipe and modify the flareCuttingAA or extending the pipe Outer DiameterDrain hose installation Two hoses are firmly connected, there is no water leakageHose tight Check for leakage on both side of the drain outletPurging the connected pipes AQseriesAdding Refrigerant Add refrigerant charge according to table belowIf you use a pipe shorter than 4 30/32 or 5 36 m Purge time is normalPerfoAA rming the gas leak tests Fixing the indoor unit in placeOutdoor unit installed on the wall by rack Fixing the outdoor unit in placeAppropriate support wall or ground ModelPress the Power button and check the following Press the Power button to stop the operationFinalAA Check and Trial Operation Check the followingsAfter tube contraction work is completed, wrap it with Apply heat to the contraction tube to contract itInsulation tape to finish AATechnical Specifications AS36UGBUMG AS30UGBUMGEnglish Questions or COMMENTS? EgyptAir Conditioner