
Remote controller display
| Operation mode indicator | |
Turbo indicator | Low battery indicator | |
Quiet indicator | ||
Transmit indicator | ||
(Has no this function) | ||
Smart Saver indicator | Air swing indicator | |
| ||
| Fan speed indicator | |
On Timer indicator | Auto (Turbo) | |
Low | ||
Off Timer indicator | ||
Medium | ||
indicator | ||
High | ||
|
Heat mode can be selected AQSeries.
As to ASSeries, don’t operate the air conditioner when the remote controller is set to Heat mode).
ENGLISH
Battery changing time
When the battery is exhausted, () will be displayed in the remote controller display. When the icon appears, change the batteries. The remote controller requires two 1.5V AAA type batteries.
Storing the remote controller
When you do not use the remote controller for long time, remove the batteries from the remote controller and store it.
Inserting the batteries
1.Push the lever as arrow indicates on the rear side of the remote controller and pull up.
2.Insert two AAA batteries.
Check and match
3.Close the cover by place it back to its original position.
You should hear click sound when the cover is locked properly.
• The signal may not be received well of electronic lighting style fluorescent lamps such as inverter fluorescent lamps
are in the same space.
• If other electrical products operate by the remote controller, call your nearest contact center.
9
MAX4