Samsung RS26MBZBL1/ZAM, RS26MBZBL1/XSG manual Removing the Fridge Door, Levelling the Refrigerator

Removing the Fridge Door

1. With the door closed, remove the upper hinge cover 1 using a screwdriver.

1

2.Remove hinge bracket 3 and the ground screw 2 by turning counter-clockwise, and take off the upper hinge 4 . Be careful that the door does not fall on you as you are removing it.

2

3

4

LEVELLING THE REFRIGERATOR

Now that the doors are back on the refrigerator, you want to make sure the refrigerator is level so that you can make fi nal adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.

The front of the refrigerator is also adjustable.

Before levelling the refrigerator, remove the front leg cover

Open both the freezer and fridge doors, and then take off the front leg cover by turning the three screws counter-clockwise.

Be careful not to miss the parts of refrigerator.

3.Remove the door from the lower hinge 5 by lifting the door straight

up 6 .

4.Remove the lower hinge 7 from the bracket 8 by gently lifting the lower hinge upwards.

Reattaching the freezer doors

To reattach the freezer doors, assemble parts in reverse order.

8_ setting up

When the Freezer door is lower than the fridge

Insert a fl at-blade screwdriver into a slot on the Leg, turn it clockwise or counter clockwise to level the freezer.

When the Freezer door is higher than the fridge

Insert a fl at-blade screwdriver into a slot on the Leg, turn it clockwise or counter clockwise to level the fridge.

		Leg
Screw Driver	Leg	Screw Driver

Refer to the next section for the best way to make very minor adjustments to the doors.

DA99-03327E (EN+FR+AR)-0.1.indb Sec4:8

2011.7.11 11:56:46 AM