INSTALLATION
REMINGTON QFP40 Direct Vent FIREPLACE
HEARTH REQUIREMENTS
No clearances to combustible flooring are required for installation of the Remington QFP40, as referenced in the Clearances to Combustibles on page 7 of this manual.
NOTE: Ensure the depth of your flooring material does not exceed the 1" height at bottom front flange of the ZC Appliance, illustrated below. Clearance of this area is necessary in order to allow freedom of movement of the control panel access door when installed later.
Left Side of
ZC
Appliance
Right Side of
ZC
Appliance
Lower front edge of ZC Appliance
Flooring | 1" | |
(tile, wood, carpet) | ||
| ||
must lie beneath this edge. |
|
Page 20 |