BRICK INSTALL
REMINGTON QFP40 Direct Vent FIREPLACE
BRICK INSTALLATION
Installation of the brick set should be made prior to the logset, nugget and lava rock installation.
Optional Accessory Part #
Kits includes: 1 Rear brick, 1 Right Brick, 1 Left Brick and 2 Brick clips.
NOTE: BRICK IS FRAGILE. HANDLE WITH CARE.
1. Place rear brick behind log rack against rear wall of firebox as shown in Fig. 1.
.FIG. 1
2.Remove mounting screws from the upper right and left sides of firebox, see Figure 4 for location of mounting screw, and gently slide the right and left side brick panels into place as shown in Figures 2 and 3.
FIG. 2
Page 48 |