Linear DVS-2400 Test Mode, Start In Off, OPTIONAL YOUR USER CODE 1 GONG & 4 BEEPS, keypad’s, Done

Page 22
TEST MODE

TEST MODE

Even though this is a self-monitoring supervised system, the National Burglar and Fire Alarm Association recommends that all security systems should be tested manually on a regular basis.

1.

The Console must be in Off Mode before switching

 

to Test Mode.

2.

Switch the Console into Test Mode by entering a

 

user code and pressing TEST.

 

When the system is switched to the Test Mode, the Console

 

will sound a “Gong” and four “Beeps”.

3.

Holding down the TEST button in Test Mode will light

 

all of the Console’s indicators.

 

The sensor status indicators will fl ash for each sensor

NOTE: If the Console is left unattended in Test Mode, it will automatically switch back to Off Mode after three minutes.

When directly connecting (without a telephone line) to the DVS-2400 with the RA-2400 remote access software (Version 1.3 or later), press the EMERGENCY key while in Test Mode to cause the Console to connect to the modem.

TEST MODE

START IN OFF

programmed into the Console.

4. Go to each sensor and press its test button or open

and close the protected opening.

5. To test the wireless keypad, press the wireless

keypad’s

key.

The Console will make a “Bing” sound as each sensor is

tested, followed by 1-3 beeps indicating signal strength with

3 beeps being the strongest signal.

As each sensor is tested, the sensor status indicator for the

sensor will stop fl ashing and return to showing the current

status of the sensor.

TEST

(OPTIONAL)

YOUR

USER

CODE

1 GONG & 4 BEEPS

6. Continue testing until there are no fl ashing sensor

status indicators.

DONE

SENSOR OPERATION IN EACH CONSOLE MODE

SENSOR TYPE

OFF MODE

CHIME MODE

 

HOME MODE

AWAY MODE

 

 

 

 

 

AUTOMATION

 

ACTIVATES AND DEACTIVATES THE AUTOMATION OUTPUT

 

 

 

 

 

EMERGENCY

 

ARMED 24-HOURS - TRIGGERS EMERGENCY ALARM

 

 

 

 

 

PANIC

 

ARMED 24-HOURS - TRIGGERS SILENT PANIC ALARM

 

 

 

 

 

FIRE

 

ARMED 24-HOURS - TRIGGERS FIRE ALARM

 

 

 

 

 

 

PERIMETER

DEACTIVATED

CHIME

 

INSTANT BURGLARY ALARM

 

 

 

 

 

EXIT/ENTRY

DEACTIVATED

CHIME

 

DELAYED BURGLARY ALARM

 

 

 

 

 

 

 

 

 

 

 

INSTANT BURGLARY ALARM UNLESS

INTERIOR

DEACTIVATED

DEACTIVATED

 

DEACTIVATED

ACTIVATED DURING AN ENTRY

 

 

 

 

 

DELAY, THEN IT IS DELAYED

 

 

 

 

 

 

CHIME

 

 

CHIME

 

 

 

 

 

 

 

2-BUTTON ARM/DISARM (LEFT)

LEFT BUTTON SWITCHES SYSTEM TO AWAY MODE †

 

 

 

2-BUTTON AUTOMATION (RIGHT)

 

LEFT BUTTON SWITCHES SYSTEM TO OFF MODE ‡

IF ALARM MEMORY IS ACTIVE, SWITCHES SYSTEM TO OFF MODE ‡

 

EMERGENCY (BOTH BUTTONS)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2-BUTTON ARM (LEFT)

LEFT BUTTON SWITCHES SYSTEM TO AWAY MODE †

 

 

 

2-BUTTON DISARM (RIGHT)

 

RIGHT BUTTON SWITCHES SYSTEM TO OFF MODE ‡

IF ALARM MEMORY IS ACTIVE, SWITCHES SYSTEM TO OFF MODE ‡

 

EMERGENCY (BOTH BUTTONS)

 

 

 

 

 

 

 

 

 

 

 

 

 

ENVIRONMENTAL

 

ARMED 24-HOURS - TRIGGERS ANNUNCIATION ONLY

 

 

 

 

 

 

INTERIOR HOME

DEACTIVATED

DEACTIVATED

 

INSTANT BURGLARY ALARM

 

 

 

 

 

 

CAN BE HOME MODE USING PROGRAMMING STEP 50

‡ CAN BE CHIME MODE USING PROGRAMMING STEP 51

Console Zone Table

20

Image 22
Contents SECURITY SUPERVISED WIRELESS SECURITY CONSOLEInstallation & Programming Instructions USA & CanadaThis symbol is for important notes INTRODUCTIONTABLE OF CONTENTS 1.THE DVS-2400SECURITY SYSTEM CONSOLEDOOR/WINDOW SENSORS WIRELESS KEYPADREMOTE CONTROLS SMOKE DETECTOREXAMPLE SYSTEM DESIGN THE INSTALLATION2.SECURITY SYSTEM FLOOR PLAN Example Residential Security System Floor PlanABOUT SENSOR STATUS SUPERVISION 3.TYPICAL SYSTEM SENSORSDOOR/WINDOW SENSOR WIRELESS KEYPADSwitching to Off Mode stops the alarm siren 4.CONSOLE FEATURES5 4 3 Switching to Chime Mode stops the alarm sirenType 2AG, 1-ampfuse CASE LOCKING SCREW 5.CONSOLE INSTALLATIONCONSOLE LOCATION WALL MOUNTINGEXTERNAL ALARM SIREN CONNECTION EXTERNAL CONSOLE SPEAKER CONNECTIONcan talk to the occupants through the external AUTOMATION OUTPUT CONNECTION OPTIONAL TELEPHONE LINE CONNECTIONConnect the Console to the telephone line if the BACKUP BATTERY INSTALLATION OPTIONAL CONSOLE POWER CONNECTIONnot plug the transformer in until the wiring is completeSTART IN TEST indicator for that sensor will stay lit6.BASIC CONSOLE PROGRAMMING MASTER USER CODE 1 GONG & 5 BEEPSselect a sensor number to program the sensor into PROGRAMMING DIFFERENT SENSOR TYPESFollow the instructions on the previous page to For DXT-61, DXT-21, DXS-21, DXT-41,& DXS-62A7.BASIC SENSOR INSTALLATION DXS-10WIRELESS KEYPADTEST SENSORS DXS-31& DXS-32DOOR/WINDOW SENSORS4.Snap sensor onto mounting plate 8.CUSTOMIZING THE CONSOLE LABELING THE SENSORS9.CONSOLE OPERATING MODES and stops any alarms in progresscaused the alarm will fl ash OFF MODESTART IN OFF OR CHIME MODE HOME MODESECURE EXIT START IN HOME MODEOPTIONAL YOUR USER CODE 1 GONG & 3 BEEPS AWAY MODEQUICK ARM START HERE HOLDTEST MODE 3 beeps being the strongest signalstatus indicators START IN OFFSENSOR LOW BATTERIES CONSOLE LOW BATTERY10.SYSTEM TROUBLE INDICATIONS SENSOR RADIO TROUBLEACTIVATE SENSOR DONE START IN TEST and the sensor status indicator will turn off11.CUSTOMIZING THE SYSTEM MASTER USER CODE 1 GONG & 5 BEEPS SENSORSENSOR NUMBER FOR INTERIOR SENSOR NUMBER FOR CHIME8 FOR 8 TUV CHIME ZONE AWAY 1 BING DONE 7 FOR 7 PRS INTERIOR ZONE AWAY 1 BING DONEMAKING A SENSOR PERFORM A DIFFERENT FUNCTION SENSOR NUMBER FOR FUNCTION CHANGENEW FUNCTION NUMBER FOR SENSOR AWAY 1 BING DONE AWAYHOME = PROGRAM SETUP MODE12.ADVANCED PROGRAMMING TEST = REMOVEENTRY DELAY TIME CHANGING A SENSORS RESTORE REQUIREMENTSCHANGING A SENSORS SUPERVISION EXIT DELAY TIMEFIRE SIREN TIME REMOTE CONTROL ARMING LEVELREMOTE CONTROL DISARMING LEVEL AUTOMATION OUTPUT TIMEDISABLING QUICK ARMING SILENT BURGLARY ALARMSSILENT EMERGENCY ALARMS AUTOMATIC RESTORAL OF BYPASSED SENSORSAUTOMATION OUTPUT ON DURING AND AFTER ALARM AUTOMATION OUTPUT MODE DURING ALARMREMOTE CONTROL ARM/DISARM CHIRP AUTOMATION OUTPUT ON DURING ALARMAUTOMATION OUTPUT DURING EXIT/ENTRY DELAYS REMOTE ACCESS PASSWORDAUTOMATION OUTPUT WHILE ARMED AUTOMATION OUTPUT POLARITYchanged using programming STEP #99 Because access to programming would be impossibleusing these steps. The master user code can be CONSOLE MASTER RESETGeneral Communicator Programming Table SETUP MODE13.COMMUNICATOR PROGRAMMING SETUP MODE2-WAYAUDIO COMMUNICATOR ENABLEGENERAL COMMUNICATOR OPTIONS VOICE RESPONSEDIALING METHOD CALL LIMITERDIALING DELAY 0PROGRAMMING STEP #101CALL ROUTING COMMUNICATOR REPORTING OPTIONSREPORTING FORMAT Communicator Reporting Option TableSECONDARY TELEPHONE NUMBER ACCOUNT NUMBERPRIMARY TELEPHONE NUMBER SUPERVISORY OR PAGER TELEPHONE NUMBEROPENING AND CLOSING REPORTS REPORT CONSOLE TROUBLEREPORT FORCE ARMING POINT ID REPORTINGSTEPS #201-206 COMMUNICATOR REPORTING CODESGENERAL REPORTING CODES General Reporting Codes TableFORCE ARMING REPORTING CODE SYSTEM REPORTING CODESSTEPS #261-266 DURESS REPORTING CODESTEPS #210-233 4 BY 2 FORMAT POINT ID ALARM REPORT CODES4 BY 2 FORMAT POINT ID REPORTING CODES 4 BY 2 FORMAT POINT ID TROUBLE REPORT CODESSTEP # 4 by 2 Format Point ID Reporting Code Table4 BY 2 FORMAT POINT ID REPORTING CODES PROGRAMMING FUNCTION14. IMPORTANT INFORMATION LINEAR LIMITED WARRANTYWIRELESS PRODUCT NOTICE FCC NOTICE
Related manuals
Manual 48 pages 58.1 Kb

DVS-2400 specifications

The Linear DVS-1200, DVS-2400, RA-2400, DUAL-824, and DVS-2408 are advanced digital video surveillance systems designed for a variety of security applications. These models offer state-of-the-art features, technologies, and characteristics that enhance security monitoring and recording capabilities.

The DVS-1200 is a compact and efficient digital video recorder that supports up to 12 channels of video input. It features high-resolution recording capabilities, providing clear and detailed images. With real-time playback and advanced motion detection, the DVS-1200 allows users to monitor activities effectively. Its user-friendly interface simplifies configuration and operation, making it accessible for both novice and experienced users.

Upgraded for larger installations, the DVS-2400 supports up to 24 channels. This model is equipped with H.264 video compression technology, significantly reducing storage requirements while maintaining high-quality images. The DVS-2400 also offers remote access capabilities, enabling users to view live footage or playback recorded events from anywhere using a smartphone or computer. Its built-in analytics features allow for motion detection, line crossing alerts, and more, enhancing overall security.

The RA-2400 is a remarkable model designed for robust performance in demanding environments. This recorder not only supports 24 channels but also integrates advanced RAID technology for data redundancy and enhanced storage reliability. The RA-2400 is ideal for applications where data loss is unacceptable, making it suitable for critical infrastructure and high-security locations.

The DUAL-824 model stands out with its unique dual-stream encoding feature. It allows simultaneous recording and streaming of two video resolutions, providing flexibility for different applications such as local monitoring and remote access. This model supports up to 8 channels and is equipped with advanced event triggers, ensuring significant activities do not go unnoticed.

Finally, the DVS-2408 is a versatile and high-performance system designed for larger facilities. With support for 24 channels and the ability to integrate with various IP cameras, the DVS-2408 delivers exceptional scalability. This model comes with comprehensive software for monitoring and management, allowing for multiple users and custom user permissions.

Together, these Linear video surveillance models represent a robust and reliable solution for modern security needs, featuring the latest technologies and high-quality performance to ensure safety and peace of mind in various environments.