Linear DVS-2400 Secure Exit, Start In Off Or Chime Mode, Start In Home Mode, Done, Quick Arm

Page 20
HOME MODE

HOME MODE

Use this mode when sleeping or when anyone is staying inside.

Home Mode causes an instant alarm when any perimeter sensor is triggered.

Home Mode causes a delayed alarm when any exit/ entry sensor is triggered (except in Home Instant Mode when they are instant).

Alarm siren stops automatically after fi ve minutes and the system will remain armed.

Home Mode ignores all interior sensors (motion detectors, etc.).

1A. Arm to Home Mode by entering a user code, and pressing HOME.

1B. The user can “Quick Arm” to Home Mode from Off or Chime Mode by pressing HOME for two seconds. (Quick arming can be disabled; see the “Advanced Programming” section of this manual.)

When the system is armed to the Home Mode, the keypad(s) will sound a “Gong” and two “Beeps”.

2.Enter a user code and press OFF or CHIME to disarm from Home Mode and/or stop the alarm siren.

If an alarm has occurred, multiple Beeps will sound after disarming and the sensor indicator for the sensor(s) that caused the alarm will fl ash (switch to Off Mode again or re-arm the system to stop the fl ashing alarm memory light).

MANUAL BYPASSING OF SENSORS

Manual bypassing of sensors in the Home Mode allows arming of the system at night with open windows, while still having perimeter protection with other closed doors and windows.

1.The Console will resist arming with open door or window sensors.

Four high-low Beeps to warn the user that something is open and the system will remain in the previous mode.

Lit sensor status indicators show which sensors are open.

2.To manually bypass the open sensors, arm the system again within fi ve seconds.

A “Gong” and two “Beeps” will sound, the HOME indicator will light, and the open sensors will be bypassed.

WARNING: Bypassed sensors cannot cause an alarm. Closing the sensor removes the bypass.

SECURE EXIT

1.If the system is already in the Home Mode and the user wants to exit the premises while leaving someone inside with the system still in Home Mode, enter a user code and press the HOME key.

HOME MODE

START IN OFF

OR CHIME MODE

SECURE EXIT

START IN

HOME MODE

The HOME light will blink for 60 seconds. No exit delay Beeps will sound during the Exit Delay.

2A. The user can leave through a door with a delayed perimeter sensor during the 60 second Exit Delay without causing the Console to begin an Entry Delay.

2B. Re-entering during the silent Exit Delay will extend the Exit Delay another 60 seconds (one time only).

NOTE: The Exit Delay time can be changed; see the “Advanced Programming” section of this manual.

HOME

(OPTIONAL)

YOUR

USER

CODE

1 GONG & 2 BEEPS

HOME

(OPTIONAL)

YOUR

USER

CODE

1 GONG & 2 BEEPS

HOME INSTANT MODE

1.If the system is already in the Home Mode and the user wants to make all exit/entry sensors instant, press HOME for two seconds.

Two “Gongs” and two “Beeps” will sound and the HOME light will blink continuously.

2.Because all exit/entry sensors will now cause an instant alarm when in Home Mode, the Console must be disarmed before opening any exit/entry delay door.

NOTE: If quick arming is disabled the Home Instant Mode is unavailable.

DONE

QUICK ARM

START IN OFF

OR CHIME MODE

HOLD

HOME DOWN

1 GONG & 2 BEEPS

DONE

DONE

HOME INSTANT

MODE

START IN

HOME MODE

HOLD

HOME DOWN

2 GONGS MANUAL BYPASSING OF SENSORS & 2 BEEPS DONE

18

Image 20
Contents SUPERVISED WIRELESS SECURITY CONSOLE Installation & Programming InstructionsSECURITY USA & CanadaThis symbol is for important notes INTRODUCTIONTABLE OF CONTENTS 1.THE DVS-2400SECURITY SYSTEM CONSOLEWIRELESS KEYPAD REMOTE CONTROLSDOOR/WINDOW SENSORS SMOKE DETECTORDESIGN THE INSTALLATION 2.SECURITY SYSTEM FLOOR PLANEXAMPLE SYSTEM Example Residential Security System Floor Plan3.TYPICAL SYSTEM SENSORS DOOR/WINDOW SENSORABOUT SENSOR STATUS SUPERVISION WIRELESS KEYPAD4.CONSOLE FEATURES 5 4 3Switching to Off Mode stops the alarm siren Switching to Chime Mode stops the alarm sirenType 2AG, 1-ampfuse 5.CONSOLE INSTALLATION CONSOLE LOCATIONCASE LOCKING SCREW WALL MOUNTINGcan talk to the occupants through the external EXTERNAL CONSOLE SPEAKER CONNECTIONEXTERNAL ALARM SIREN CONNECTION Connect the Console to the telephone line if the TELEPHONE LINE CONNECTIONAUTOMATION OUTPUT CONNECTION OPTIONAL CONSOLE POWER CONNECTION not plug the transformer in until the wiring isBACKUP BATTERY INSTALLATION OPTIONAL completeindicator for that sensor will stay lit 6.BASIC CONSOLE PROGRAMMINGSTART IN TEST MASTER USER CODE 1 GONG & 5 BEEPSPROGRAMMING DIFFERENT SENSOR TYPES Follow the instructions on the previous page toselect a sensor number to program the sensor into For DXT-61, DXT-21, DXS-21, DXT-41,& DXS-62A7.BASIC SENSOR INSTALLATION DXS-10WIRELESS KEYPAD4.Snap sensor onto mounting plate DXS-31& DXS-32DOOR/WINDOW SENSORSTEST SENSORS 8.CUSTOMIZING THE CONSOLE LABELING THE SENSORSand stops any alarms in progress caused the alarm will fl ash9.CONSOLE OPERATING MODES OFF MODEHOME MODE SECURE EXITSTART IN OFF OR CHIME MODE START IN HOME MODEAWAY MODE QUICK ARMOPTIONAL YOUR USER CODE 1 GONG & 3 BEEPS START HERE HOLD3 beeps being the strongest signal status indicatorsTEST MODE START IN OFFCONSOLE LOW BATTERY 10.SYSTEM TROUBLE INDICATIONSSENSOR LOW BATTERIES SENSOR RADIO TROUBLEand the sensor status indicator will turn off 11.CUSTOMIZING THE SYSTEMACTIVATE SENSOR DONE START IN TEST MASTER USER CODE 1 GONG & 5 BEEPS SENSORSENSOR NUMBER FOR CHIME 8 FOR 8 TUV CHIME ZONE AWAY 1 BING DONESENSOR NUMBER FOR INTERIOR 7 FOR 7 PRS INTERIOR ZONE AWAY 1 BING DONESENSOR NUMBER FOR FUNCTION CHANGE NEW FUNCTION NUMBER FOR SENSOR AWAY 1 BING DONEMAKING A SENSOR PERFORM A DIFFERENT FUNCTION AWAYSETUP MODE 12.ADVANCED PROGRAMMINGHOME = PROGRAM TEST = REMOVECHANGING A SENSORS RESTORE REQUIREMENTS CHANGING A SENSORS SUPERVISIONENTRY DELAY TIME EXIT DELAY TIMEREMOTE CONTROL ARMING LEVEL REMOTE CONTROL DISARMING LEVELFIRE SIREN TIME AUTOMATION OUTPUT TIMESILENT BURGLARY ALARMS SILENT EMERGENCY ALARMSDISABLING QUICK ARMING AUTOMATIC RESTORAL OF BYPASSED SENSORSAUTOMATION OUTPUT MODE DURING ALARM REMOTE CONTROL ARM/DISARM CHIRPAUTOMATION OUTPUT ON DURING AND AFTER ALARM AUTOMATION OUTPUT ON DURING ALARMREMOTE ACCESS PASSWORD AUTOMATION OUTPUT WHILE ARMEDAUTOMATION OUTPUT DURING EXIT/ENTRY DELAYS AUTOMATION OUTPUT POLARITYBecause access to programming would be impossible using these steps. The master user code can bechanged using programming STEP #99 CONSOLE MASTER RESETSETUP MODE 13.COMMUNICATOR PROGRAMMINGGeneral Communicator Programming Table SETUP MODECOMMUNICATOR ENABLE GENERAL COMMUNICATOR OPTIONS2-WAYAUDIO VOICE RESPONSECALL LIMITER DIALING DELAYDIALING METHOD 0PROGRAMMING STEP #101COMMUNICATOR REPORTING OPTIONS REPORTING FORMATCALL ROUTING Communicator Reporting Option TableACCOUNT NUMBER PRIMARY TELEPHONE NUMBERSECONDARY TELEPHONE NUMBER SUPERVISORY OR PAGER TELEPHONE NUMBERREPORT CONSOLE TROUBLE REPORT FORCE ARMINGOPENING AND CLOSING REPORTS POINT ID REPORTINGCOMMUNICATOR REPORTING CODES GENERAL REPORTING CODESSTEPS #201-206 General Reporting Codes TableSYSTEM REPORTING CODES STEPS #261-266FORCE ARMING REPORTING CODE DURESS REPORTING CODE4 BY 2 FORMAT POINT ID ALARM REPORT CODES 4 BY 2 FORMAT POINT ID REPORTING CODESSTEPS #210-233 4 BY 2 FORMAT POINT ID TROUBLE REPORT CODES4 by 2 Format Point ID Reporting Code Table 4 BY 2 FORMAT POINT ID REPORTING CODESSTEP # PROGRAMMING FUNCTIONLINEAR LIMITED WARRANTY WIRELESS PRODUCT NOTICE14. IMPORTANT INFORMATION FCC NOTICE
Related manuals
Manual 48 pages 58.1 Kb

DVS-2400 specifications

The Linear DVS-1200, DVS-2400, RA-2400, DUAL-824, and DVS-2408 are advanced digital video surveillance systems designed for a variety of security applications. These models offer state-of-the-art features, technologies, and characteristics that enhance security monitoring and recording capabilities.

The DVS-1200 is a compact and efficient digital video recorder that supports up to 12 channels of video input. It features high-resolution recording capabilities, providing clear and detailed images. With real-time playback and advanced motion detection, the DVS-1200 allows users to monitor activities effectively. Its user-friendly interface simplifies configuration and operation, making it accessible for both novice and experienced users.

Upgraded for larger installations, the DVS-2400 supports up to 24 channels. This model is equipped with H.264 video compression technology, significantly reducing storage requirements while maintaining high-quality images. The DVS-2400 also offers remote access capabilities, enabling users to view live footage or playback recorded events from anywhere using a smartphone or computer. Its built-in analytics features allow for motion detection, line crossing alerts, and more, enhancing overall security.

The RA-2400 is a remarkable model designed for robust performance in demanding environments. This recorder not only supports 24 channels but also integrates advanced RAID technology for data redundancy and enhanced storage reliability. The RA-2400 is ideal for applications where data loss is unacceptable, making it suitable for critical infrastructure and high-security locations.

The DUAL-824 model stands out with its unique dual-stream encoding feature. It allows simultaneous recording and streaming of two video resolutions, providing flexibility for different applications such as local monitoring and remote access. This model supports up to 8 channels and is equipped with advanced event triggers, ensuring significant activities do not go unnoticed.

Finally, the DVS-2408 is a versatile and high-performance system designed for larger facilities. With support for 24 channels and the ability to integrate with various IP cameras, the DVS-2408 delivers exceptional scalability. This model comes with comprehensive software for monitoring and management, allowing for multiple users and custom user permissions.

Together, these Linear video surveillance models represent a robust and reliable solution for modern security needs, featuring the latest technologies and high-quality performance to ensure safety and peace of mind in various environments.