Hornet Car Security 700T primary harness H1 wire connection guide, H1/1, H1/2, H1/3, H1/4, H1/5

Page 12
primary harness (H1) wire connection guide

primary harness (H1) wire connection guide

This guide describes in detail the connection of each wire. Also included are possible applications of each wire.

This system was designed with the ultimate in flexibility and security in mind. Many of the wires have more than

one possible function. Please read carefully to ensure a thorough understanding of this unit.

 

______

 

 

H1/1

ORANGE

(-) 500 mA ARMED OUTPUT

 

______

 

 

 

 

 

H1/2

WHITE

(+)/(-) SELECTABLE LIGHT FLASH OUTPUT

 

______

 

 

 

 

 

H1/3

WHITE/BLUE

(+) TRUNK RELEASE INPUT, SENSOR BYPASS

 

______

 

 

 

 

 

H1/4

BLACK/WHITE

(-) 200 mA DOMELIGHT SUPERVISION OUTPUT

 

______

 

 

 

 

 

H1/5

GREEN

(-) DOOR TRIGGER INPUT, ZONE 3

H1/6

______

 

 

 

 

BLUE

(-) INSTANT TRIGGER INPUT, ZONE 1

H1/7

______

 

 

 

 

VIOLET

(+) DOOR TRIGGER INPUT, ZONE 3

H1/8

______

 

 

 

 

BLACK

(-) CHASSIS GROUND INPUT

H1/9

______

 

 

 

 

YELLOW

(+) SWITCHED IGNITION INPUT, ZONE 5

H1/10

______

 

 

 

 

BROWN

(+) SIREN OUTPUT

H1/11

______

 

 

 

 

RED

(+) CONSTANT POWER INPUT

H1/12

______

 

 

 

 

RED/WHITE

(-) 200 mA CHANNEL 2 OR DELAYED ACCESSORY OUTPUT

 

 

 

 

H1/1 ORANGE (-) ground-when-armed output

This wire supplies a (-) ground as long as the system is armed. This output ceases as soon as the system is dis-

armed. This wire controls operation of the optional starter kill relay and can be used to control other optional

accessories.

NOTE: If connecting the orange wire to control another module, such as a 529T or 530T window controller, a 1 amp diode (type 1N4004) will be required. Insert the diode as shown in the follow- ing diagram.

IMPORTANT! Never interrupt any wire other than the starter wire.

12

© 2001 Directed Electronics, Inc. Vista, CA

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Installation Guide Model 700T2001 Directed Electronics, Inc. Vista, CA N700T Rev. E table of contents Auxiliary Harness H2 Wire Connection GuideSystem Features Learn Routine Wiring Quick Reference Guidewhat is included installation points to remembertools required deciding on component locationsvalet/program switch control modulestatus LED optional starter kill relayfinding the wires you need finding the 12V switched ignition wireobtaining constant finding a + parking light wire finding the door pinswitch circuit finding the starter wiremaking your connections solderless butt connectionssolder connections primary harness H1 wire connection guide IMPORTANT! Never interrupt any wire other than the starter wireH1/1 H1/2H1/2 WHITE light flash output H1/3 WHITE/BLUE + trunk release/sensor shunt inputConnect this wire to the optional domelight supervision relay H1/7 VIOLET + door trigger input H1/8 BLACK - chassis ground connectionH1/9 YELLOW + ignition input the same point you connect the control module’s black ground wire auxiliary harness H2 wire connection guide H2/1 BROWN - horn honk outputH2/2 GREEN arm input H2/3 RED disarm defeat inputLock Driver’s UnlockPassenger Unlock connecting door lock inputs in vehicles with driver’s door unlock and external relays door lock learn routine plug-in harnesses on-board stinger doubleguard shock sensorinternal programming jumper light flash jumpersystem features learn routine system features menu TWO CHIRPS - PRESS8 NO FUNCTION troubleshooting table of zonesrapid resume logic Shock sensor does not trigger the alarmThe Valet/program switch does not work Closing the door triggers the system, but opening the door does notStatus LED does not work wiring quick reference guide
Top Page Image Contents