Bryant 580D manual Base Unit Dimensions Ð 579F180,216, 486 220 636 288

BASE UNIT DIMENSIONS Ð 579F180,216

		UNIT						DIMENSIONS
		579F		X						Y						Z
			ft-in.		mm			ft-in.			mm				ft-in.		mm
	180		3-2		965				4-0			1219		1-10			559
	216		3-7		1090				3-2			965		1- 8			508
UNIT					CORNER WEIGHT*
579F		A				B						C				D
		lb	kg	Lb			kg			lb			kg		lb		kg
180		384	174	370			168			358			162		538		244
216		520	235	508			230			486			220		636		288

*Weights are for unit only (aluminum plate ®ns) and do not in- clude options or crating.

NOTES:

1.Dimensions in ( ) are in millimeters.

2. Center of gravity.

3. Direction of air¯ow.

4.Ductwork to be attached to accessory roof curb or adapter only.

5.Minimum clearance:

a.Rear: 7 0 (2134) for coil removal. This dimension can be re- duced to 4 0 (1219) if conditions permit coil removal from the top.

b.Left side: 4 0 (1219) for proper condenser coil air¯ow.

c.Front: 4 0 (1219) for control box access.

d.Right side: 4 0 (1219) for proper operation of damper and power exhaust (if so equipped).

e.Top: 6 0 (1829) to assure proper condenser fan operation.

f.Local codes or jurisdiction may prevail.

6.With the exception of clearance for the condenser coil and the damper/power exhaust as stated in Note No. 5, a removable fence or barricade requires no clearance.

7.Dimensions are from outside of corner post. Allow 0 -5¤16(8) on each side for top panel drip edge.

8.Do not locate adjacent units with ¯ue discharge facing econo- mizer inlet.

19