P35i Fireplace Insert
1.Feed Motor
Requires no lubrication.
Keep the motor windings free of dust. Can be wiped clean or vacuumed.
To remove feed motor;
•Slide the insert body out of the mounting frame.
•Between the feed motor and the feeder body, you'll see the cam block with a bearing that actu- ates the pusher arm.
•With a 7/16" wrench, loosen the
•With the bolt loosened, the feed motor and its mounting bracket will pull straight out of the auger shaft.
Loosen bolt in end of cam block
2.Combustion Blower
Requires no lubrication.
Keep the motor windings free of dust. Can be wiped clean or vacuumed.
To remove combustion blower;
•Slide the insert body out of the mounting frame.
•Locate the combustion blower motor in the back right corner.
•Loosen 3 wing screws and turn the blower and mounting plate 1/4 turn.
•Lower the motor and paddle fan out of the blower housing.
3.ESP- (Exhaust Sensing Probe)
Remove and wipe clean with a soft cloth and glass cleaner or alcohol.
To remove the probe;
•Slide the insert body out of the mounting frame.
•The probe is installed on the side of the exhaust chamber.
•With a 1/4" socket or driver, remove the screw that attaches the probe.
•Pull the probe out of it's mounting hole.
ESP location
Save These Instructions | Pellets or Corn/Pellet Mixture Only | 35 |