Heat & Glo LifeStyle 8000CFLP-OAKIPI Heat & Glo 8000CF-OAK-IPI 2059-900 Rev. R 6/09

3

21

5 3 4

21

STEP 5: (SRV2057-723): Mate the top of log 4 with the right metal tab on log 3. The bottom of log 4 should touch the inside face of the right grate tine.

STEP 6: (SRV2057-724): Notch in left end of Log 5 will interlock with front left corner of grate. Rest right end of log so that it engages tab on log 3. Log 2 may need to shift to right slightly.

53

C 6

2 C 1

5 3 4

6

21

STEP 7: (SRV2057-725): Place log 6 on log 2 as shown. The left end of log 6 should touch the upper knot of log 2. The

right end of log 6 should rest on the grate bar, centered between tine 4 and 5. NOTE: The front faces (C) of log 6 and 2 should be on the same plane. This is key in avoiding flame impingement.

NOTE: Finished top view.

Heat & Glo • 8000CF-OAK-IPI • 2059-900 Rev. R • 6/09 49