Desa SDVBNC, SDVBPC installation manual Attaching Lower Stove Door Panel

CAST IRON STOVE AND DIRECT-VENT BURNER SYSTEM ASSEMBLY

Stove Body Assembly (Cont.)

7

CAST IRON STOVE AND DIRECT-VENT BURNER SYSTEM ASSEMBLY

Continued

14.Lay the front panel assembly face down on a protected sur- face. Remove the two screws that hold the front plate onto the front surround plate (see Figure 14). Save these screws.

15.Optional: Remove the seven screws and washers that hold the screen onto the front surround plate. Discard these screws, wash- ers, and screen. They are for vent-free use only (see Figure 14).

16.Replace the two screws from step 14 to reassemble the front plate and the front surround plate. Set this assembly aside un- til burner system has been installed, logs have been placed inside of burner system, and glass door to burner system insert has been replaced.

Stove Door

Panel

Threaded

Hole

Door Hinge

Step Bolt

Bolt Shoulder

Figure 11 - Attaching Lower Stove Door Panel

Bolt Stop

Adjusting Nut

Door Claw

Catch Bolt

Door

Figure 12 - Catch Bolt and Door Claw Orientation

Stove	Bolt
Body

Front

Assembly

Figure 13 - Removing Front Assembly

Front Surround	Screws
Plate

Screw with

Washer

Screen

Front Plate

Figure 14 - Removing Screen from Front Assembly

For morevisit www..com

107304-01D