Faber MISTY, SPECTRA NOVA, WHISPER, SILENCE, FEELING Installation of the Flue, Placing the log set

Page 15

UK/IRL

4.6 Placing the log set

Never place extra elements of any kind into the combustion chamber. To guarantee good combustion, the log set may only be installed in the way specified by Faber International. Any other arrangement can lead to soot on logs or window. Do not use the fire with broken or missing logs.

4.6.1 Placing the log set Widescreen, Whisper, Spectra Nova, Misty and Cadra Nova

fig. 18

 

 

 

fig. 19

 

 

 

On the bottom of the logs is a identification:

• L

location on the left side resting on the rear log.

• R

location on the right side resting on the rear log.

• 1 dimple

first log left placed over the burner and resting on the

 

 

burner tray.

2 dimples placed in the middle over he burner and resting on the burner tray.

3 dimples the right side log placed over the burner and resting on the burner tray.

Attention! Beware that there are no embers between the logs and the burner tray.

UK/IRL

5.INSTALLATION OF THE FLUE

5.1Connections with use of concentric duct material

-Build the system starting from the appliance on.

-Make a hole of ø 153 mm for the wall or roof mounted terminal.

-Make sure you place the pipes in the right direction, the narrow end towards the appliance.

-Make sure the pipes are fixed sufficiently, a wall clamp every 2m, so the weight of the pipes is not resting onto the appliance.

-The outside of the pipe can become hot (140 degrees). Stay 50 mm away from wall surface or sealing. Make sure to provide sufficiently heat resistant isolation when going through the wall or roof.

-Because of expansion or cooling down the concentric pipes can turn loose. It is recommended to fix the spring clip with a self tapping screw at inaccessible places.

-To get the exact measure flue length you can use cut down- concentric pipe, wall mounted terminal or roof mounted terminal. To obtain a smoke sealed connection, the inner pipe must be 20 mm longer then the outside pipe.

-The horizontal pipes need to rise away from the appliance at a rate of 3 degrees per metre.

26

 

 

 

27

 

 

Image 15
Contents Silence Feeling Whisper Spectra Nova Cadra Nova Misty UK/IRL ContentsGeneral safety IntroductionPlease leave these instructions with the user Builders opening and surround Installation RequirementsCadra Misty Nova Feeling Silence WhisperFlue restrictor Flue requirementsTable Silence and Feeling with interior Widescreen Table Whisper and Spectra Nova with interior MV100Number is size in mm Table Cadra Nova with interior MV150 Misty with roundscreenFlue requirements continuing Terminal position Terminal position Flue terminal positionsGas connection Instructions for InstallationUsing an existing chimney as air inlet Example of how terminal position is measuredPreparing the appliances Widescreen and Whisper continuing CCCPreparing the appliance Misty Preparing the appliances Spectra Nova/Cadra Nova continuing Preparing the appliances Spectra Nova/Cadra NovaFitting the firebox continuing Fitting the fireboxInstallation of the Flue Placing the log setConnections with use of concentric duct material Connection onto an existing chimney continuing Connection onto an existing chimneyRemote control if applicable Installation remote controlSetting the right transmission code Functional balanced flue check Commissioning functional checksCheck pilot ignition Functional burner checkHanding Over ServicingFinal check and customer briefing Pilot/thermocouple assembly Cleaning the glassCleaning the combustion chamber and burner Burner tray assemblyGas control block Combustion testPart CompanyMV100 Whisper and Spectra Nova User Guide General safety instructions Safety Instructions for the UserKnob B Controlling the ApplianceLighting the fire Knob aWhen the pilot extinguishes Remote control versionTo extinguish Changing the batteries Remote controlCleaning and Service Instructions