Faber SPECTRA NOVA, WHISPER, SILENCE, MISTY, FEELING, CADRA NOVA Preparing the appliance Misty

Page 12

UK/IRL

4.3 Preparing the appliance Misty

4.3 Preparing the appliance Misty (continuing)

4. Take the box with the log set out of the combustion chamber.

5. Place the right flue restrictor in the combustion chamber. To determine the right flue restrictor, see chapter 3.

fig. 10

1. Remove the door frame. Lift and pull forward (see fig. 10).

2. Open the ashtray door by pulling down (bottom handle).

fig. 12

fig. 11

3.To open the door, remove the screws C (see fig. 11). The door opening is limited; if you need more space then remove the door (lift and pull forward). Be sure that there are no fingerprints on the glass. It is not possible to remove those prints after you burn the appliance for a while (they are burnt in).

20				21

Image 12

Contents Silence Feeling Whisper Spectra Nova Cadra Nova Misty Contents UK/IRLGeneral safety IntroductionPlease leave these instructions with the user Installation Requirements Builders opening and surroundFeeling Silence Whisper Cadra Misty NovaFlue requirements Flue restrictorTable Silence and Feeling with interior Widescreen Table Whisper and Spectra Nova with interior MV100Number is size in mm Table Cadra Nova with interior MV150 Misty with roundscreenFlue requirements continuing Terminal position Flue terminal positions Terminal positionInstructions for Installation Using an existing chimney as air inletExample of how terminal position is measured Gas connectionCCC Preparing the appliances Widescreen and Whisper continuingPreparing the appliance Misty Preparing the appliances Spectra Nova/Cadra Nova Preparing the appliances Spectra Nova/Cadra Nova continuingFitting the firebox Fitting the firebox continuingInstallation of the Flue Placing the log setConnections with use of concentric duct material Connection onto an existing chimney Connection onto an existing chimney continuingRemote control if applicable Installation remote controlSetting the right transmission code Commissioning functional checks Check pilot ignitionFunctional burner check Functional balanced flue checkHanding Over ServicingFinal check and customer briefing Cleaning the glass Cleaning the combustion chamber and burnerBurner tray assembly Pilot/thermocouple assemblyCombustion test Gas control blockCompany PartMV100 Whisper and Spectra Nova User Guide Safety Instructions for the User General safety instructionsControlling the Appliance Lighting the fireKnob a Knob BWhen the pilot extinguishes Remote control versionTo extinguish Remote control Changing the batteriesCleaning and Service Instructions