Faber WHISPER, SPECTRA NOVA, SILENCE Handing Over, Servicing, Final check and customer briefing

Page 19

UK/IRL

7. HANDING OVER

(final check and customer briefing)

7.1Instruct the customer on the full operation of the appliance.

7.2.1Advise the customer how to clean the appliance including the glass.

7.2.2Instruct the customer on the operation of the remote control, including replacement of batteries and how to set the right transmissions code.

7.2.3Hand over these instructions including the user guide to the consumer.

7.2.4Recommend that the appliance should be serviced by a competent person at least once a year.

UK/IRL

8. SERVICING

To ensure safe, efficient operation of the appliance, it is necessary to carry out routine servicing at regular intervals.

It is recommended, that the fire is inspected/serviced by a competent person at least once a year.

Important

Turn off the gas supply before commencing any servicing. Always test for gas soundness after refitting the appliance.

8.1Routine annual servicing

1.Clean (if necessary):

-the pilot system;

-the burner;

-the combustion chamber;

-the glass.

2.Check the log lay and replace the embers (if applicable).

3.Do the functional test as described at page 34.

4.Check the flue system and terminal on damage and soundness (visual inspection).

34

 

 

 

35

 

 

Image 19
Contents Silence Feeling Whisper Spectra Nova Cadra Nova Misty UK/IRL ContentsIntroduction General safetyPlease leave these instructions with the user Builders opening and surround Installation RequirementsCadra Misty Nova Feeling Silence WhisperFlue restrictor Flue requirementsTable Whisper and Spectra Nova with interior MV100 Table Silence and Feeling with interior WidescreenNumber is size in mm Misty with roundscreen Table Cadra Nova with interior MV150Flue requirements continuing Terminal position Terminal position Flue terminal positionsGas connection Instructions for InstallationUsing an existing chimney as air inlet Example of how terminal position is measuredPreparing the appliances Widescreen and Whisper continuing CCCPreparing the appliance Misty Preparing the appliances Spectra Nova/Cadra Nova continuing Preparing the appliances Spectra Nova/Cadra NovaFitting the firebox continuing Fitting the fireboxPlacing the log set Installation of the FlueConnections with use of concentric duct material Connection onto an existing chimney continuing Connection onto an existing chimneyInstallation remote control Remote control if applicableSetting the right transmission code Functional balanced flue check Commissioning functional checksCheck pilot ignition Functional burner checkServicing Handing OverFinal check and customer briefing Pilot/thermocouple assembly Cleaning the glassCleaning the combustion chamber and burner Burner tray assemblyGas control block Combustion testPart CompanyMV100 Whisper and Spectra Nova User Guide General safety instructions Safety Instructions for the UserKnob B Controlling the ApplianceLighting the fire Knob aRemote control version When the pilot extinguishesTo extinguish Changing the batteries Remote controlCleaning and Service Instructions