Faber SILENCE, SPECTRA NOVA, WHISPER, MISTY, FEELING, CADRA NOVA user manual Uk/Irl, Contents

Page 2

			CONTENTS		UK/IRL

1.	INTRODUCTION			2
2.	SAFETY INSTRUCTIONS			3
3.	INSTALLATION REQUIREMENTS			5
		3.1	Builders opening and surround	5
		3.2	Requirements outlet and exhaust	8
4.	INSTALLATION-INSTRUCTIONS			17
		4.1	Gas connection	17
		4.2	Preparation of the appliance	17
		4.3	Fitting the firebox	24
		4.4	Placing of the wood set	26
5.	INSTALLATION OF THE FLUE			27
		5.1	Connection of the flue	27
		5.2	Placing through existing chimney	28
		5.3	Remote control	30
6.	COMMISIONING			32
		6.1	Check pilot ignition	32
		6.2	Functional burner check	32
		6.3	Functional balanced flue check	33
		6.2	Check reference pressure	33
7.	HANDING OVER			34
8.	SERVICING			35
		8.1	Routine annual servicing	35
		USER GUIDE		45
9.	SAFETY INSTRUCTIONS FOR THE USER			46
10. CONTROLING THE APPLIANCE				48
11. CLEANING AND SERVICE INSTRUCTIONS				54
12. DISPOSAL OF THE PACKAGING AND THE APPLIANCE				55
INDEX 1		LIST OF SPARE PARTS		40
INDEX 2		TECHNICAL DATA		41

1

Image 2

Contents Silence Feeling Whisper Spectra Nova Cadra Nova Misty Contents UK/IRLPlease leave these instructions with the user General safetyIntroduction Installation Requirements Builders opening and surroundFeeling Silence Whisper Cadra Misty NovaFlue requirements Flue restrictorNumber is size in mm Table Silence and Feeling with interior WidescreenTable Whisper and Spectra Nova with interior MV100 Flue requirements continuing Terminal position Table Cadra Nova with interior MV150Misty with roundscreen Flue terminal positions Terminal positionExample of how terminal position is measured Instructions for InstallationUsing an existing chimney as air inlet Gas connectionCCC Preparing the appliances Widescreen and Whisper continuingPreparing the appliance Misty Preparing the appliances Spectra Nova/Cadra Nova Preparing the appliances Spectra Nova/Cadra Nova continuingFitting the firebox Fitting the firebox continuingConnections with use of concentric duct material Installation of the FluePlacing the log set Connection onto an existing chimney Connection onto an existing chimney continuingSetting the right transmission code Remote control if applicableInstallation remote control Functional burner check Commissioning functional checksCheck pilot ignition Functional balanced flue checkFinal check and customer briefing Handing OverServicing Burner tray assembly Cleaning the glassCleaning the combustion chamber and burner Pilot/thermocouple assemblyCombustion test Gas control blockCompany PartMV100 Whisper and Spectra Nova User Guide Safety Instructions for the User General safety instructionsKnob a Controlling the ApplianceLighting the fire Knob BTo extinguish When the pilot extinguishesRemote control version Remote control Changing the batteriesCleaning and Service Instructions