Regency FP90 installation manual Finishing Trim KIT Installation, 60W xAREA

Page 25

INSTALLATION

FINISHING TRIM KIT INSTALLATION

1)Unit must be installed correctly according to the speciﬁ cation in the manual. The nailing strips must be attached to the top and sides of the unit. They must be positioned so that they are set-back ½” (13 mm) from the face of the unit. This will allow for the wall sheathing to be ﬂ ush with the face of the unit and allow the trim to be installed correctly (refer to Diagram 1).

NON
-
	COMBUSTIBLE-
60"W xAREA
(1524mm
	51
1311mm		W x
			5/8"H
	H)

LEFT SIDE TRIM

TOP	TRIM

STEP	#2

STEP		#1

2x4 FRAMING

RIGHT SIDE TRIM

	Front Trim
Side	Side
Trim	Trim

Unit With Finished Trim

2x4	HEADER
	HEADER	(ON
		(ON	EDGE)
			EDGE)

2x4 FRAMING

INSTALLATION

Diagram 1

Assembly Details

FPI FP90 Wood Fireplace

25

Image 25

Contents FP90 Wood Fireplace Regency Fireplace Product Table of Contents Safety Label for FP90 Safety LabelProduct Details InstallationPlease Retain this Manual for Future Reference Dimensions and Specifications Clearances and Height Requirements Fireplace Enclosure Framing Installation of Nailing StripsHearth Extension Framing DetailsBefore YOU Start Installation ComponentsChimney System Considerations Chase EnclosureOn E Installation Measurements / Framing DetailsInstalling STAND-OFFS Assembly StepsInstalling the Chimney System SET the Regency FP90 Into PositionSpecial Notes Offset Chimney InstallationElevation FT # of Elbows Above SEA Level Installing Outside AIR KITInstalling Blower Systems Wiring the FP90Gravity AIR Feed KIT Option Internal Blower with Thermo-DiscFinishing Regency FP90 Non-self Supporting, Thin Veneer Facades InstallationCompleting The Facing Masonry Retainer Kit Option Completing The Mantle Finishing DetailsMasonry Liner Bricks Glass Secondary AIR Tube InstallationSafety Precautions Ash Drawer Kit InstallationASH Drawer KIT OptionDiagram FAN InstallationMasonry Cover Plate Installation Installation 60W xAREA Finishing Trim KIT InstallationStandoff Installing the Handles on the Screen Fireplace Screen InstallationInstalling the Top Louver Installing the Bottom Louver Regency Louver InstallationInstalling the Facing Guide Excalibur Faceplate InstallationExcalibur Accent KIT Installation General Heatwave KIT not EPA ApprovedListings and Code Approvals InformationMinimum Framing Clearances InstallationR90 / EX90 Models All ModelsWiring Diagram MaintenanceOperation Operating Instructions Safety GuidelinesOperating Instructions First FirePlated Finishes Glass Cleaning MaintenanceGlass Removal Replacement Door GasketParts LIST- Firebox & Body Parts ListParts LIST- BAFFLES, DOOR, Options FPI FP90 Wood Fireplace Warranty Lifetime WarrantyInstaller Please complete the following information