INSTALLATION
EXCALIBUR ACCENT KIT INSTALLATION
1)Remove the handles by removing the nut and screw. Install the new handles by placing them in position over the holes on the surround louver. Put the screws through the holes and secure them by tightening the nut.
3)Remove the 2 studs on the sides of the Hood. Insert the new studs through the holes and secure them by fi rst putting on the washer and then tighten the nut.
INSTALLATION
4)
2)Place the emblem over the emblem design on the sur- round. Insert the studs through the holes. To secure them fi rst put on the split lock washer and then the nut and tighten.
30 | FPI FP90 Wood Fireplace |