Nilfisk-ALTO 8 GALLON AE, ATTIX 8 GALLON manual After finishing work, Picking up dry Substances

Page 10

ATTIX 8 GALLON

ATTIX 8 GALLON AS/E

english

5.1.1 Picking up dry

CAUTION!

 

 

substances

Do not pick up flammable

 

 

substances.

 

￿

5.1.2 Picking up liquids

CAUTION!

 

Do not pick up flammable

 

liquids.

 

Always remove the filter bag

 

and check the floater before

 

picking up liquids (see section

 

7.2.3 "Replacing the filter

 

element").

Before picking up dry sub- stances with max. workplace concentrations, always ensure that a filter bag is inserted in the tank (see section 9.5 "Accessories" for order number). Disposal of the picked up material is then simple and hygienic.

After picking up liquids, the filter element is wet. A damp filter element clogs more quickly when dry substances are picked up. For this reason the filter element should be washed and dried or replaced by a dry element before dry substances are picked up.

The use of a separate filter element or filter screen is recommended.

If foam appears, stop work immediately and empty the tank.

To reduce the amount of foam, use foam killer Alto Foam Stop (see section 9.5 "Accessories" for order number).

6 After finishing work

6.1Switching the vacuum

cleaner off and storage

1. Switch off the vacuum cleaner and pull the mains plug out of the socket.

2.Wind up the power cord and hang it on the handle.

3.Empty the tank and clean the vacuum cleaner.

4.After picking up liquids: Store the upper section of the cleaner separately so that the filter element can dry.

5.Store the cleaner in a dry room where it is protected from unauthorized use.

10

Image 10
Contents Attix 8 Gallon Attix 8 Gallon AS/E Attix 8 Gallon Attix 8 Gallon AS/E Contents Important safety instructions During use Before starting the vacuum cleanerAppliance socket Electrical connectionsBefore starting Assembling the vacuum cleanerDescription PurposeEnsure that the power tool is switched off Ensure that the cleaner is switched offConnecting power OperationSwitch position Switching onVacuum cleaner Suction power control1Applications and techniques Cleaning the filter element1Only after sucking up dusts without a filter bag Picking up dry Substances Switching the vacuum Cleaner off and storageAfter finishing work Picking up liquids Do not pick up flammable LiquidsMaintenance Maintenance planReplacing the filter Never use the vacuum cleaner without a filterElement Cause TroubleshootingFault RemedyFurther information CleanerGuarantee Recycling the vacuumTechnical data AccessoriesSommaire Généralités Symboles de mise en gardeConsignes de sécurité importantes Pour votre propre sécuritéPendant le service Electricité Prise intégréeAffectation Avant la mise en serviceAssemblage de l’aspirateur Veillez à ce que l’aspira- teur soit arrêté Commande / FonctionnementConnexions Raccordement du tuyau flexible d’aspiration Raccordement d’unMise en marche de l’aspirateur Position du commutateur AS/EDépoussiérage de la Domaines d’utilisation et méthodes de travailCartouche filtrante1 Après le travail Travaux de maintenance Vidage de la cuve à saletés Plan de maintenanceRemplacement du sac à poussières ’aspirez jamais sans filtre Causes Suppression de dérangementsDérangement SuppressionDivers Accessoires Caractéristiques techniquesInternet