Nilfisk-ALTO 8 GALLON AS Operation, Ensure that the cleaner is switched off, Connecting power

Page 7

ATTIX 8 GALLON ATTIX 8 GALLON AS/E

5.Fit the suction tube fastener about 20 cm from the edge of the lower extension tube as shown in the figure.

english

4 Operation

4.1 Connections

4.1.1 Connecting the suction hose

4.1.2 Electrical connection

The operating voltage shown on

 

the rating plate must corres-

 

pond to the voltage of the

 

mains power supply.

1. Connect the suction hose.

1.Ensure that the cleaner is switched off.

2.Insert the power cord into a properly installed and fused socket with earthing contact.

4.1.3 Connecting power

To comply with regulations, only

tools1)

approved dust producing tools

 

should be connected.

The maximum power consump- tion of the connected power tool is stated in section 9.4 "Techni- cal data".

1.Ensure that the power tool is switched off.

2.Connect the power tool to the appliance socket1) on the control panel.

1)Option depending on model

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Attix 8 Gallon Attix 8 Gallon AS/E Attix 8 Gallon Attix 8 Gallon AS/E Contents Important safety instructions Electrical connections Before starting the vacuum cleanerAppliance socket During usePurpose Assembling the vacuum cleanerDescription Before startingOperation Ensure that the cleaner is switched offConnecting power Ensure that the power tool is switched offSuction power control1 Switching onVacuum cleaner Switch positionApplications and techniques Cleaning the filter element1Only after sucking up dusts without a filter bag Picking up liquids Do not pick up flammable Liquids Switching the vacuum Cleaner off and storageAfter finishing work Picking up dry SubstancesMaintenance plan MaintenanceReplacing the filter Never use the vacuum cleaner without a filterElement Remedy TroubleshootingFault CauseRecycling the vacuum CleanerGuarantee Further informationAccessories Technical dataSommaire Pour votre propre sécurité Symboles de mise en gardeConsignes de sécurité importantes GénéralitésPrise intégrée Pendant le service ElectricitéAffectation Avant la mise en serviceAssemblage de l’aspirateur Raccordement d’un Commande / FonctionnementConnexions Raccordement du tuyau flexible d’aspiration Veillez à ce que l’aspira- teur soit arrêtéAS/E Mise en marche de l’aspirateur Position du commutateurDépoussiérage de la Domaines d’utilisation et méthodes de travailCartouche filtrante1 Après le travail Travaux de maintenance Vidage de la cuve à saletés Plan de maintenanceRemplacement du sac à poussières ’aspirez jamais sans filtre Suppression Suppression de dérangementsDérangement CausesDivers Caractéristiques techniques AccessoiresInternet
Top Page Image Contents