3.4 Main Screen
The operations in 3.3 Address Search Method have made information about the units known. The [Unit Attributes] are displayed on top of the address buttons.
The Function Buttons are now enabled at this time.
(1)Click on an address [Button] displaying attributes and information about that unit will be displayed in the [Unit Information Display Columns].
(2) The menu bar will display [File], [Option] ,[Print] and [Help].
-Click on [File] and ”Save System Information” and “Return”
Click on “Save System Information” and the message “Are you sure you want to save the System Information?” will appear.
Clicking 
displays the screen to save data. Change the data name as required and save it. You may enter your comment also.
Click on 
to return to the Main Screen. [Refer to 5.1 System Information Data.]
Click on “Return” to end the operation of the
-Click on [Option] and “Automatic searching” and the “Stop mail communication”
Click on “Automatic searching ” and the message “Start the automatic searching. Is it OK?” will appear.
Click on 
to perform automatic searching or click on 
to return to the Main Screen.
For more information about automatic searching, refer to [3.3 Address Search Method 3.3.2 Automatic Searching].
Click on “Stop mail communication” ,and the Stop mail communication Screen will appear.
Clicking on 
stops the mail transfer processing of operation monotor data to remote mail servers.
After a while, the setting completion message appears. Clicking on returns to the main screen.
Clicking on | returns to the main screen directly. |
-Clicking on [Print] prints out the display currently shown on the screen.
-Click on [Help] and "Explanation of Terminology" and "Operation Method"
[Refer to 3.6 Connecting Information 3.6.2 (2) ”Menu Bar” ]
26