Mitsubishi G-50A Operation Monitor, Message Monitoring! Please wait for a moment. will appear

Page 30

3.7 Operation Monitor

*Items Performed Here

-Monitors the operating condition and operating data of the current units every minute. This information can be displayed and saved.

*When an excessively large number of the objective unit for monitoring exists, the monitoring interval may exceed 1 minute (70s, 80s, ---).

*The capacity to store the data obtained by the maintenance tool counts for 2G-bite maximum.When the remaining storage capacity is getting insufficient during Operation Monitoring, Warning Screen will appear. In this case, suspend the Operation Monitoring, move to Offline screen and delete unnecessary data to keep a proper capacity.

3.7.1Screen Transfer Operation

(1)Click on on the Main Screen.

(2)Click on the unit to be monitored.

If only outdoor unit is selected here, the operating data for the units connected to the outdoor unit will be automatically monitored.

The maximum number which can carry out a monitor changes with selected models. An error message will appear if the limited number of units is exceeded.

The standard of the number which can carry out a monitor.

*When only Outdoor Unit is selected.

-One (1) Outdoor Unit + 50 Indoor Units.

-One (1) Outdoor Unit + Three (3) OC Sub Controller (BC,BS,OS…) + 50 Indoor Units.

*When only Indoor Units are selected, 50 Units.

(3)After the units to be monitored have been selected, click

on .

(4)The message “Monitoring! Please wait for a moment.” will appear.

After a while, the screen to select monitor method appears.

When it is judged that monitoring with one minute cycle may not be performed because of many units to be monitored, a message of [The monitoring cycle will be [* *] seconds due to too many IC units for monitoring. ---]will be displayed automatically. To continue the monitoring, click [YES], while to suspend it once to reduce the quantity of units for monitoring, click [NO]. Reduction of one IC can minimize the cycle time by about one second.

*In "MN converter connection", it shifts to (7).

(5)When desiring to observe the operation data immediately,

select [Realtime Monitor Mode] and then click on . Select [Mail communication Mode] to observe the operation data by the off-line monitor later, after mail-transmitting the operation data beforehand by using the mail transmission function.

29

Image 30

Contents Mitsubishi Operating ManualIntroduction of Maintenance Tools ForewordOn-Line Monitorvia MN converter Case for remote connection Dialup connection mode On-Line Monitorvia G-50Remote access method Wide area access modeImage of the Operation monitor mail communication mode Off-Line MonitorRequired Operating Environment Hardware RequirementsRequired Materials Setting up the database InstallationSetting Up the Maintenance Tools New setup MinutesSetting up the Maintenance Tools Uninstalling the Maintenance Tool Running Maintenance Tool UpgradeEnding the Maintenance Tool Upgrade the DatabaseUninstalling the Maintenance Tools RE Change of computer name on PCWide area access mode Starting the Maintenance ToolNormal mode Starting and Ending the ApplicationCase for remote connection Page Click on Line will be disconnected Starting the On-Line MonitorG-50 connection Case for local connectionCase for remote connection Dialup Next Remote Monitor screen is displayedCase for remote connection E-mail Address book Using the Wide area access mode Starting the Off-Line MonitorOnline Connection Creating the Area name folderCreating the Customer name folder Setting the Air conditioning system name Setting screen of air conditioning systemAbove Setting of Com port Other settingMail setting of maintenance tool PC Offline AnalyzeEnding the Off-Line Monitor Open the Main ScreenOpen the Off-line Analyze Screen Terms for Each Section Design of ScreenOperating Method On-Line Monitor Operating Method On-Line Monitor Screen TransferAddress Search Method Selection Function ChartAddress Search Method Automatic SearchAutomatic Searching Manual SearchingSearching Screen will appear Refer to 3.6 Connecting Information 3.6.2 2 Menu Bar Main ScreenScreen Transfer Operation Connecting InformationFunction Selection Operations Items Performed Here4Momentarily, the Connecting Information Screen Screen Functions and OperationClick on Term and Explanation of Terminology Screen appear Operation Monitor Message Monitoring! Please wait for a moment. will appearMomentarily, the Operation Status Monitor Screen will appear Screen Functions and Operations 1Operation ButtonsAbout LM Adapter Introduction to the screen Tens digit Trend graph Ending the graph Screen function and operationMalfunction Log Message Monitoring. Please wait for a moment. will appearMessage Close the malfunction log display? will be displayed Optional Setting Self-Diagnosis MonitoringCommand Screen and return to the Optional Setting Screen Sending CommandMonitoring of Pre-error Data Refer to 3.6 Connecting Information 3.6.2 2Menu BarDate / Time Setting Main ScreenOperation Control Screen Functions and Operation Indoor unit, Lossnay unitScreen Functions and OperationBC Controller Free contact of indoor unit Starting of this functionMonitoring of contact status Operation of output contact Termination of this functionOff-Line Monitor Screen Transfer Monitoring of Pre-error DataOff-Line Monitor Operating Method Title ScreenSystem Information Monitor Function common for each screen Filing operationOff-Line Analyzing Operation Status Monitor ScreenMonitor Screen. Refer to c Graph Trend Graph ScreenPage Mail Server Setting Check mailSystem Information Monitoring of Pre-error Data 4.5.1 Off-Line Analyzing Export Function common for each screen Filing operationDelete Data ImportText Convert Monitor Data information convertRight-clicking menu Offline Analyze on Wide area access mode System Information Data Pre-error DataFile Names Operating Status Monitor DataHow to change setting of Firewall How to Change Setting of Firewall for Windows XPE-Mail mode and MN converter connection, it is not related II In the case of G-50 Network Remote Connection Dialup Case of Windows XP Service Pack Page Page Trouble with Main Screen Troubleshooting?Trouble When Installing or Starting Trouble Cause RepairConnecting information Trouble Operation Monitor TroubleOperation Monitor Mail Communication Mode Trouble Malfunction Log TroubleSpecific troubles induced by E-mail connection mode Free contact of indoor unit TroubleOff-Line Monitor Trouble1 Off-Line Monitor Trouble2